I've had the problem with setting the colors and then changing one of the colors and it doesn't take. Clearing all colors and reloading is what I have been doing...not solving the problem but I don't ruin the shirt. Mike Laughing Palm Inc. wrote: >Hi there, Folks. > >I wonder if anyone else is having this same issue?.... > >My Amaya will sometimes not change to the proper color/needle, even though >the OS software has the correct needle number listed in the color sequence >list. Here's an example: >4 color changes listed in design, needles 16, 11, 13, 11 in that order. >The machine stitched colors 16, 11, 13, 13. > >This has happened several times before, but not with regularity - just does >it when it feels like it! (Although it seems to manifest itself most often >after a color change has been made between garments.) Very >frustrating...especially when it ruins a garment. By the way, my AmayaOS >version is 5.07.056. > >And speaking of colors...does everyone's OS screw up the color display of a >design when the thread cones are colored in? Or when a "Hold" is inserted >into the color sequence?? Just wondering.... > >Thanks, > >Jim Sulsona >Laughing Palm, Inc. >Custom Embroidered & Screen Printed Products >Post Office Box 957073 >Duluth, GA 30095-9518 USA >Toll Free: 1-877-4EMBROIDERY >Tel: 770-448-1171 >Fax: 770-417-1457 >sales@xxxxxxxxxxxxxxxx >www.laughingpalm.com <http://www.laughingpalm.com/> > > > > > > >