OK, maybe this seems too simplistic, but doesn't this seem like a problem with the OS?? Anyone else wonder why this hasn't been fixed if it's a recurring and repeatable problem? Maybe it's just my frustration talking, but known problems - especially one that's existed for as long as this one has - should have been fixed by now...-SIGH!- OK...after venting, I feel a little better. :-D) Cheers, Jim -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Linen Barn Sent: Thursday, May 11, 2006 3:37 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Color Change Problems! I have found whenever I need to change 1 color in a design, usually text, I reset all colors and do them all over again, otherwise it doesn't always take the changes. Aaron Sargent The Linen Barn linen@xxxxxxxxxxx 541-770-2957 Medford, OR ----- Original Message ----- From: "Mike Garber" <agraphic2@xxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Thursday, May 11, 2006 11:44 AM Subject: [amayausers] Re: Color Change Problems! > I've had the problem with setting the colors and then changing one of > the colors and it doesn't take. Clearing all colors and reloading is > what I have been doing...not solving the problem but I don't ruin the > shirt. > > Mike > > Laughing Palm Inc. wrote: > >>Hi there, Folks. >> >>I wonder if anyone else is having this same issue?.... >> >>My Amaya will sometimes not change to the proper color/needle, even though >>the OS software has the correct needle number listed in the color sequence >>list. Here's an example: >>4 color changes listed in design, needles 16, 11, 13, 11 in that order. >>The machine stitched colors 16, 11, 13, 13. >> >>This has happened several times before, but not with regularity - just >>does >>it when it feels like it! (Although it seems to manifest itself most >>often >>after a color change has been made between garments.) Very >>frustrating...especially when it ruins a garment. By the way, my AmayaOS >>version is 5.07.056. >> >>And speaking of colors...does everyone's OS screw up the color display of >>a >>design when the thread cones are colored in? Or when a "Hold" is inserted >>into the color sequence?? Just wondering.... >> >>Thanks, >> >>Jim Sulsona >>Laughing Palm, Inc. >>Custom Embroidered & Screen Printed Products >>Post Office Box 957073 >>Duluth, GA 30095-9518 USA >>Toll Free: 1-877-4EMBROIDERY >>Tel: 770-448-1171 >>Fax: 770-417-1457 >>sales@xxxxxxxxxxxxxxxx >>www.laughingpalm.com <http://www.laughingpalm.com/> >> >> >> >> >> >> >> > > >