I agree, if I weren't too old to change my ways I would move on to something else Been doing this since high shool 29 years next month Robert tvservice@xxxxxxxxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "teltek2" <teltek2@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, December 11, 2002 7:38 PM Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber and cross > > Better subject for the Chat list, but different people will have different > spins on this subject. > I for one would rather repair 2 VCR's at $25, than Zero VCR's at $50. As I > mentioned previously, don't pass this info on to your customers. Just keeps > me from saying.."Do you want fries with that"? > C'mon folks...we all know where this type of business is heading, just make > the best of it. > You,... young guys that still have a chance to bail out, do it now...and > leave, what's left to us "Old Fellows". Right Al...?? > > -Ed- > Tel-Tek Electronics > Ontario-Canada > > teltek2@xxxxxxxxxxxx > ----- Original Message ----- > From: "David Lessard" <mrfixit@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, December 11, 2002 8:09 PM > Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber > and cross > > > > > > Finally someone said something! > > > > David Lessard > > mrfixit@xxxxxxxxxxx > > > > -----Original Message----- > > From: techassist-bounce@xxxxxxxxxxxxx > > [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Jeff Dougherty > > Sent: Wednesday, December 11, 2002 8:00 PM > > To: techassist@xxxxxxxxxxxxx > > Subject: [TechAssist] Re: Mode switch for these combos fix and > > partnumber and cross > > > > > > > > Joe, > > How do you know how much it costs to keep my doors open, or Joe Schmoe, > down > > the > > street. > > You, in no way, can determine how much it costs to keep anyone's doors > open, > > but > > your own. > > There are many factors to take into consideration before "YOU" tell me, or > > anyone, > > how much they should be charging. What works for you, may not work for the > > guy in > > CA. > > I bet your competitors have a different cost of doing business than you > do. > > You have no right, or knowledge, to tell anyone else how much they should > be > > charging to do repairs. > > Jeff@xxxxxxxxxxxxxxxxxx > > FAX 717-564-4952 > > Jeff Dougherty > > Intrepid Video & Electronics Be careful of your thoughts. > > 501 Luther Rd They may become your words > > Harrisburg, PA 17111 any moment. > > 717-909-8844 > > VCR tips, electronics info & general interest. > > www.intrepid-video.com www.tech-repair.net > > www.thetoolcaddy.com www.9-11-2001tragedy.com > > *********************************************************************** > > > > ----- Original Message ----- > > From: "Joe Batchelor" <jbc@xxxxxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Tuesday, December 10, 2002 10:12 PM > > Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber > > and > > cross > > > > > > > > You charge $20 for a free estimate? > > I do not fault you because I do not give a free estimate either, > > but I do not tell anyone that it is free. > > > > Your $40 hour goes into replacing shop supplies, schematics and > > new equipment purchases, but what about rent, lights, water, gas, > insurance, > > phone, taxes, accounting, advertising, warranty work, vacation pay? > > > > Many years ago I worked with an old man that said that he might starve to > > death, > > but he was not going to do it working his butt off. > > > > I understand the problem of low priced VCR's, but that does not change > the > > cost of doing business. If it costs $100 an hour to keep the doors open, > > then > > collecting $40 is just putting off the final result. > > > > Joe Batchelor CET TX-80 > > > > > > 12/10/02 10:31:53 AM, "David Lessard" <mrfixit@xxxxxxxxxxx> wrote: > > >We truly live in a throw away world. You can buy one of those crappy > stereo > > >VCR's today for about $90 CDN. If it lasted 3 - 5 years would you > honestly > > >spend $60 - $80 to repair it, probably not, and that is a problem for > > repair > > >shops today trying to make money. I provide free estimates for all my > > >customers, I also explain that if for whatever reason the repair is not > > >practical, i.e. too much money, the refused estimate is only $20. > Needless > > >to say I try to repair everything I can, within reason of course. This > > >usually means flat rating jobs because sometimes those nasty > intermittents > > >hold up the diagnosis and/or repair, other times there are no resources > > >(working blind - no schematic). I ask my customers how much do they want > to > > >spend upfront, and if the repair cost exceeds that amount I call them > with > > >the estimate. In this way I can repair things while open rather then > > >tracking the customer down for repair approval, it works for me. My rate > is > > >$40 hour and most of that goes into replacing shop supplies, schematics > and > > >new equipment purchases. In the end I work for about $10 - $15 hour, > almost > > >not worth it, but it's in my blood :-) > > > > > >David Lessard > > >Alexandria Electronics > > >mrfixit@xxxxxxxxxxx > > >(613)525-4502 > > > > > >-----Original Message----- > > >From: techassist-bounce@xxxxxxxxxxxxx > > >[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Leonard G. > > >Caillouet > > >Sent: Tuesday, December 10, 2002 11:03 AM > > >To: techassist@xxxxxxxxxxxxx > > >Subject: [TechAssist] Re: Mode switch for these combos fix and > > >partnumber and cross > > > > > > > > > > > >We are fortunate not to have to depend on VCRs and combos for a > significant > > >part of our business. We charge a $30 fee up front for estimates, which > > >applies to the repair cost if the estimate is accepted. We charge a > > minimum > > >of $40 labor for cleaning and very minor repairs. For a mode switch > > >cleaning or replacement we charge $60 or $80 depending on the amount of > > >disassemble required. This makes a lot of repairs not economical and we > > >explain this to the customer up front. I can't justify charging less > when > > >we could be doing TVs and RPTV and making money. I figure a minimum of > $60 > > >an hour to keep the doors open. > > > > > >Leonard G. Caillouet > > >Service Manager > > >Electronics World > > >Gainesville, FL > > >352-332-5608 > > >352-332-5668 (fax) > > > > > >----- Original Message ----- > > >From: "Electric Medic" <info@xxxxxxxxxxxxxxxxx> > > >To: <techassist@xxxxxxxxxxxxx> > > >Sent: Tuesday, December 10, 2002 2:22 AM > > >Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber > > >and cross > > > > > > > > >> > > >> We always get at least $49 on vcr repairs. The customer has to leave > $35 > > >> when they drop it off. If they do not want to put that in it, then we > do > > >not > > >> even have to look at it. Once we get the $35, we always almost charge > > more > > >> for the final repair, usually $20 or $30 more, plus parts. It must not > > >seem > > >> as hard if they break it down in two payments. VCR's are at least 30% > of > > >our > > >> business. For everyone that knows about or wants to buy a new cheap > one, > > >> there is one that wants to have their original fixed. And I am thankful > > >for > > >> that. We also have to fix many under warranty, some Manufacturers pay > us > > >$85 > > >> labor to fix a VCR. I will let our customers know what the > manufacturers > > >pay > > >> to have one fixed, then it doesn't seem to bad for the customer to pay > > it. > > >> > > >> Perry Bower > > >> Electric Medic > > >> "It's Cheaper to Keep Her" > > >> http://www.electricmedic.com > > >> Check out the Electronic Repair Screensaver We created. More Images to > > >come! > > >> To download these Collections you must first install the Eyetide > Viewer: > > >> > > > >http://www.eyetide.com/download/?s=O3OfmSLHXygGHCv1W6Gz3Bgjtq3DNNMNdcKsYSVG > > C > > >> "We're Number One Where it Really Counts, With our Customers" > > >> 3850 Washington Road Suite 5b > > >> Martinez, Georgia 30907 > > >> Phone: 706-8MEDIC4 (863-3424) > > >> Phone: 706-863-3474 > > >> Fax: 706-863-2316 > > >> mailto:info@xxxxxxxxxxxxxxxxx > > >> "WE REPAIR WITH CARE" > > >> > > >> SERVICE CENTERS PLEASE READ!! > > >> 1. Are you currently backed up or over-loaded? > > >> 2. Are you short a tech or have one on vacation? > > >> 3. Do you need help with a very difficult repair? > > >> 4. Would you like to make money jobbing the work out? > > >> 5. Would you like to ship out less profitable products so you can > repair > > >> others? > > >> If you answered Yes to any of the above questions, Checkout these > > >websites: > > >> http://www.electricmedic.com/salesa.htm > > >> or > > >> http://www.electricmedic.com/shipping.htm > > >> > > >> Factory Trained Authorized Service Center For: APEX, Fisher, GE, > > KEC/KTV, > > >> Konka, Mitsubishi, Panasonic, Philips Magnavox, Pioneer, ProSCAN, RCA, > > >> Samsung, Sanyo, Sharp, SONY, Technics, Toshiba, Zenith > > >> > > >> Provide Extended care for: AON, Circuit City, GE Contracts, Glass > Agency, > > >> Philips Contracts, NEW, Rex > > >> > > >> > > >> -----Original Message----- > > >> From: techassist-bounce@xxxxxxxxxxxxx > > >> [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Gary McCartney > > >> Sent: Tuesday, December 10, 2002 1:36 AM > > >> To: techassist@xxxxxxxxxxxxx > > >> Subject: [TechAssist] Re: Mode switch for these combos fix and > > >> partnumber and cross > > >> > > >> > > >> > > >> Jeff, thats great if you can get that much, but how do you manage to > get > > >> it? Do you still offer the long warranties that you once did? What do > > >> you do if a unit requires major parts such as heads? Do you eat the > cost > > >> of the part, or do you offer to do the job for a higher amount? Around > > >> here I can barely get $49.00 CDN for a VCR repair, unless it is a > higher > > >> end unit and the customer remembers paying $600.00 for it when it was > > >> new, plus they also have to understand that the new ones are junk. I > > >> remind people of the junk factor all the time but they still would > > >> rather buy the Walleymart one year wonder. (wonder if it will work for > a > > >> year, that is, hehehe) > > >> > > >> > > >> > > >> Gary McCartney > > >> > > >> McCartney Electronics > > >> 7134 Fife Rd, RR 7 > > >> Guelph Ontario Canada N1H 6J4 > > >> Fax: (519)821-1530 > > >> email: gary (at) number63.ca > > >> > > >> > > >> > > >> > > >> > > >> Jeff Dougherty wrote: > > >> > > > >> > I've started charging a flat $49.00 fee on VCR repairs. I can do most > > >> repairs in > > >> > one hour or less. > > >> > Jeff@xxxxxxxxxxxxxxxxxx > > >> > FAX 717-564-4952 > > >> > Jeff Dougherty > > >> > Intrepid Video & Electronics Be careful of your thoughts. > > >> > 501 Luther Rd They may become your words > > >> > Harrisburg, PA 17111 any moment. > > >> > 717-909-8844 > > >> > VCR tips, electronics info & general interest. > > >> > www.intrepid-video.com www.tech-repair.net > > >> > www.thetoolcaddy.com www.9-11-2001tragedy.com > > >> > > *********************************************************************** > > >> > > > >> > ----- Original Message ----- > > >> > From: "Leonard G. Caillouet" <lcaillo@xxxxxxxxxxxx> > > >> > To: <techassist@xxxxxxxxxxxxx> > > >> > Sent: Monday, December 09, 2002 11:13 AM > > >> > Subject: [TechAssist] Re: Mode switch for these combos fix and > > >partnumber > > >> and > > >> > cross > > >> > > > >> > How much labor do you all charge for these repairs? > > >> > > > >> > Leonard G. Caillouet > > >> > Service Manager > > >> > Electronics World > > >> > Gainesville, FL > > >> > 352-332-5608 > > >> > 352-332-5668 (fax) > > >> > > > >> > ----- Original Message ----- > > >> > From: "Jeff Dougherty" <support@xxxxxxxxxxxxxxxxxx> > > >> > To: <techassist@xxxxxxxxxxxxx> > > >> > Sent: Sunday, December 08, 2002 8:59 PM > > >> > Subject: [TechAssist] Re: Mode switch for these combos fix and > > >partnumber > > >> > and cross > > >> > > > >> > > > > >> > > Jose, > > >> > > The part number is in the thread. > > >> > > > >> > >All 3 needed the same rotary switch. Part number > > >483527617343 > > >> > > > > >> > > Jeff@xxxxxxxxxxxxxxxxxx > > >> > > FAX 717-564-4952 > > >> > > Jeff Dougherty > > >> > > Intrepid Video & Electronics Be careful of your thoughts. > > >> > > 501 Luther Rd They may become your words > > >> > > Harrisburg, PA 17111 any moment. > > >> > > 717-909-8844 > > >> > > VCR tips, electronics info & general interest. > > >> > > www.intrepid-video.com www.tech-repair.net > > >> > > www.thetoolcaddy.com www.9-11-2001tragedy.com > > >> > > > > >*********************************************************************** > > >> > > > > >> > > ----- Original Message ----- > > >> > > From: "JOSE R. PANIAGUA" <breadywater@xxxxxxx> > > >> > > To: "techassist" <techassist@xxxxxxxxxxxxx> > > >> > > Sent: Sunday, December 08, 2002 11:24 PM > > >> > > Subject: [TechAssist] Re: Mode switch for these combos fix and > > >> partnumber > > >> > and > > >> > > cross > > >> > > > > >> > > > > >> > > hello: J Siverman > > >> > > Can you please be so kind and at least give us the part # ,so if > > >someone > > >> > want to > > >> > > order he can do it with it. > > >> > > Thank you. > > >> > > Jose R. Paniagua. > > >> > > Breadywater@xxxxxxx > > >> > > > > >> > > > > >> > > ----- Original Message ----- > > >> > > From: J Silverman > > >> > > Sent: Sunday, December 08, 2002 1:20 PM > > >> > > To: techassist@xxxxxxxxxxxxx > > >> > > Subject: [TechAssist] Re: Mode switch for these combos fix and > > >> partnumber > > >> > and > > >> > > cross > > >> > > > > >> > > > > >> > > Over here, the newer Funai mode switches cost about $1.50. We > usually > > >> buy > > >> > at > > >> > > least 20 of a kind at a time directly from Funai Parts. At current > > >shop > > >> > > rates, $1.50 is equivalent to about 75 seconds of time, so it costs > > >more > > >> > to > > >> > > repair than replace. However, a lot of them can be taken apart > > without > > >> > > desoldering which saves about 30 seconds. Still cheaper to replace > > and > > >> far > > >> > > less chance of having to do it all over again free. Also the newest > > >> switch > > >> > > is so small and flimsy, if you even touch the fingers they just > roll > > >> over > > >> > > and die. > > >> > > I do save lots of the old switches for the day when they may become > > >NLA. > > >> > > Jerry Silverman > > >> > > Greentron Inc > > >> > > From: "Vilhelm Boor" <villyboor@xxxxxxxxx> > > >> > > > I think you will find that it is a problem with the > > >surface > > >> of > > >> > > the plastic, We have a series here where over the years I have gone > > >from > > >> > > advocating not to clean to cleaning them. This is my reason for > using > > >> the > > >> > > finest grade of steel wool to resurface metal and plastic. Then a > > good > > >> > wash > > >> > > in hot water and detergent to get impurities from all surfaces. Now > > >wash > > >> > > again with contact cleaner and lightly coat with a silicone > > lubricant. > > >> > > Retention the fingers and its as good as new > > >> > > > > > > >> > > > >yes--replace the mode switch. I have repaired a lot of mode > > >switches > > >> > > over > > >> > > > >the years, and the only ones I have had too replace in the past > > >were > > >> in > > >> > > > >really bad shape. These can look perfect, and fail. I don't > know > > >> > > > >why------yet > > >> > > > >Jeff Farnsworth > > >> > > , Lyles Tv wrote: > > >> > > > >> > >I have 3 combos in here right now. With the help of people > > >> here, > > >> > I > > >> > > > >found > > >> > > > >> > that rebuilding/cleaning the mode switches like I have been > > >doing > > >> > for > > >> > > > >> > years----don't work on these. I have trying to create a > > little > > >> > > database > > >> > > > >of > > >> > > > >> > combo cross references as no one has been able to supply me > > >with > > >> > one. > > >> > > > >The > > >> > > > >> > three units I have here are > > >> > > > >> > >Sylvania SSC092 > > >> > > > >> > >Phillips CCB092 > > >> > > > >> > >Symphonic WF-13C1 > > >> > > > >> > >All 3 needed the same rotary switch. Part number > > >483527617343 > > >> > > > >> > >Don't bother trying ness right now. I just ordered their > > last > > >2 > > >> > in > > >> > > > >stock, > > >> > > > >> > just 2 minutes ago > > >> > > > >> > >I do have some more in my cross, but it is not in a > > >presentable > > >> > > format > > >> > > > >> > yet. When I can donate something usable, i will up load it. > > >> > > > >> > > Btw, the generally common symptom with these were "stuck > > >tape" > > >> > > > >> > > > > >> > > > >> > > >> > > > > >> > > ------------------------------------------ > > >> > > Submit A Repair Tip For Everyone Here: > > >> > > http://www.tech-assist.org/secure/tip/main.html > > >> > > ------------------------------------------ > > >> > > To REMOVE your email address, click here: > > >> > > http://www.tech-assist.org/unsubb.html > > >> > > To CHANGE your email address, click here: > > >> > > http://www.techassist.net/forms/change.html > > >> > > > >> > ------------------------------------------ > > >> > Submit A Repair Tip For Everyone Here: > > >> > http://www.tech-assist.org/secure/tip/main.html > > >> > ------------------------------------------ > > >> > To REMOVE your email address, click here: > > >> > http://www.tech-assist.org/unsubb.html > > >> > To CHANGE your email address, click here: > > >> > http://www.techassist.net/forms/change.html > > >> > > > >> > ------------------------------------------ > > >> > Submit A Repair Tip For Everyone Here: > > >> > http://www.tech-assist.org/secure/tip/main.html > > >> > ------------------------------------------ > > >> > To REMOVE your email address, click here: > > >> > http://www.tech-assist.org/unsubb.html > > >> > To CHANGE your email address, click here: > > >> > http://www.techassist.net/forms/change.html > > >> > > >> -- > > >> > > >> ------------------------------------------ > > >> Submit A Repair Tip For Everyone Here: > > >> http://www.tech-assist.org/secure/tip/main.html > > >> ------------------------------------------ > > >> To REMOVE your email address, click here: > > >> http://www.tech-assist.org/unsubb.html > > >> To CHANGE your email address, click here: > > >> http://www.techassist.net/forms/change.html > > >> > > >> ------------------------------------------ > > >> Submit A Repair Tip For Everyone Here: > > >> http://www.tech-assist.org/secure/tip/main.html > > >> ------------------------------------------ > > >> To REMOVE your email address, click here: > > >> http://www.tech-assist.org/unsubb.html > > >> To CHANGE your email address, click here: > > >> http://www.techassist.net/forms/change.html > > > > > > > > >------------------------------------------ > > >Submit A Repair Tip For Everyone Here: > > >http://www.tech-assist.org/secure/tip/main.html > > >------------------------------------------ > > >To REMOVE your email address, click here: > > > http://www.tech-assist.org/unsubb.html > > >To CHANGE your email address, click here: > > > http://www.techassist.net/forms/change.html > > > > > >------------------------------------------ > > >Submit A Repair Tip For Everyone Here: > > >http://www.tech-assist.org/secure/tip/main.html > > >------------------------------------------ > > >To REMOVE your email address, click here: > > > http://www.tech-assist.org/unsubb.html > > >To CHANGE your email address, click here: > > > http://www.techassist.net/forms/change.html > > > > > > > > > > > ------------------------------------------ > > Submit A Repair Tip For Everyone Here: > > http://www.tech-assist.org/secure/tip/main.html > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > > > > > > > ------------------------------------------ > > Submit A Repair Tip For Everyone Here: > > http://www.tech-assist.org/secure/tip/main.html > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > > > ------------------------------------------ > > Submit A Repair Tip For Everyone Here: > > http://www.tech-assist.org/secure/tip/main.html > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > > > > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html