[TechAssist] Re: Mode switch for these combos fix and partnumber and cross
- From: "Jose Reyes" <jr@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 9 Dec 2002 11:46:16 -0500
We get around $50.00
Jose' Reyes
@ Kwik Fix TV
619 Pondella Rd.
N. Ft. Myers, Fl. 33903
E-Mail: jr@xxxxxxxxxxx
----- Original Message -----
From: "Leonard G. Caillouet" <lcaillo@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, December 09, 2002 11:13 AM
Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber
and cross
>
> How much labor do you all charge for these repairs?
>
> Leonard G. Caillouet
> Service Manager
> Electronics World
> Gainesville, FL
> 352-332-5608
> 352-332-5668 (fax)
>
> ----- Original Message -----
> From: "Jeff Dougherty" <support@xxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Sunday, December 08, 2002 8:59 PM
> Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber
> and cross
>
>
> >
> > Jose,
> > The part number is in the thread.
> > > >> > >All 3 needed the same rotary switch. Part number 483527617343
> >
> > Jeff@xxxxxxxxxxxxxxxxxx
> > FAX 717-564-4952
> > Jeff Dougherty
> > Intrepid Video & Electronics Be careful of your thoughts.
> > 501 Luther Rd They may become your words
> > Harrisburg, PA 17111 any moment.
> > 717-909-8844
> > VCR tips, electronics info & general interest.
> > www.intrepid-video.com www.tech-repair.net
> > www.thetoolcaddy.com www.9-11-2001tragedy.com
> > ***********************************************************************
> >
> > ----- Original Message -----
> > From: "JOSE R. PANIAGUA" <breadywater@xxxxxxx>
> > To: "techassist" <techassist@xxxxxxxxxxxxx>
> > Sent: Sunday, December 08, 2002 11:24 PM
> > Subject: [TechAssist] Re: Mode switch for these combos fix and
partnumber
> and
> > cross
> >
> >
> > hello: J Siverman
> > Can you please be so kind and at least give us the part # ,so if someone
> want to
> > order he can do it with it.
> > Thank you.
> > Jose R. Paniagua.
> > Breadywater@xxxxxxx
> >
> >
> > ----- Original Message -----
> > From: J Silverman
> > Sent: Sunday, December 08, 2002 1:20 PM
> > To: techassist@xxxxxxxxxxxxx
> > Subject: [TechAssist] Re: Mode switch for these combos fix and
partnumber
> and
> > cross
> >
> >
> > Over here, the newer Funai mode switches cost about $1.50. We usually
buy
> at
> > least 20 of a kind at a time directly from Funai Parts. At current shop
> > rates, $1.50 is equivalent to about 75 seconds of time, so it costs more
> to
> > repair than replace. However, a lot of them can be taken apart without
> > desoldering which saves about 30 seconds. Still cheaper to replace and
far
> > less chance of having to do it all over again free. Also the newest
switch
> > is so small and flimsy, if you even touch the fingers they just roll
over
> > and die.
> > I do save lots of the old switches for the day when they may become NLA.
> > Jerry Silverman
> > Greentron Inc
> > From: "Vilhelm Boor" <villyboor@xxxxxxxxx>
> > > I think you will find that it is a problem with the surface
of
> > the plastic, We have a series here where over the years I have gone from
> > advocating not to clean to cleaning them. This is my reason for using
the
> > finest grade of steel wool to resurface metal and plastic. Then a good
> wash
> > in hot water and detergent to get impurities from all surfaces. Now wash
> > again with contact cleaner and lightly coat with a silicone lubricant.
> > Retention the fingers and its as good as new
> > > >
> > > >yes--replace the mode switch. I have repaired a lot of mode switches
> > over
> > > >the years, and the only ones I have had too replace in the past were
in
> > > >really bad shape. These can look perfect, and fail. I don't know
> > > >why------yet
> > > >Jeff Farnsworth
> > , Lyles Tv wrote:
> > > >> > >I have 3 combos in here right now. With the help of people
here,
> I
> > > >found
> > > >> > that rebuilding/cleaning the mode switches like I have been doing
> for
> > > >> > years----don't work on these. I have trying to create a little
> > database
> > > >of
> > > >> > combo cross references as no one has been able to supply me with
> one.
> > > >The
> > > >> > three units I have here are
> > > >> > >Sylvania SSC092
> > > >> > >Phillips CCB092
> > > >> > >Symphonic WF-13C1
> > > >> > >All 3 needed the same rotary switch. Part number 483527617343
> > > >> > >Don't bother trying ness right now. I just ordered their last 2
> in
> > > >stock,
> > > >> > just 2 minutes ago
> > > >> > >I do have some more in my cross, but it is not in a presentable
> > format
> > > >> > yet. When I can donate something usable, i will up load it.
> > > >> > > Btw, the generally common symptom with these were "stuck tape"
> > > >> > >
> > > >>
> >
> > ------------------------------------------
> > Submit A Repair Tip For Everyone Here:
> > http://www.tech-assist.org/secure/tip/main.html
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
>
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
>
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
