[TechAssist] Re: Mode switch for these combos fix and partnumber and cross
- From: "Electric Medic" <info@xxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 10 Dec 2002 02:22:37 -0500
We always get at least $49 on vcr repairs. The customer has to leave $35
when they drop it off. If they do not want to put that in it, then we do not
even have to look at it. Once we get the $35, we always almost charge more
for the final repair, usually $20 or $30 more, plus parts. It must not seem
as hard if they break it down in two payments. VCR's are at least 30% of our
business. For everyone that knows about or wants to buy a new cheap one,
there is one that wants to have their original fixed. And I am thankful for
that. We also have to fix many under warranty, some Manufacturers pay us $85
labor to fix a VCR. I will let our customers know what the manufacturers pay
to have one fixed, then it doesn't seem to bad for the customer to pay it.
Perry Bower
Electric Medic
"It's Cheaper to Keep Her"
http://www.electricmedic.com
Check out the Electronic Repair Screensaver We created. More Images to come!
To download these Collections you must first install the Eyetide Viewer:
http://www.eyetide.com/download/?s=O3OfmSLHXygGHCv1W6Gz3Bgjtq3DNNMNdcKsYSVGC
"We're Number One Where it Really Counts, With our Customers"
3850 Washington Road Suite 5b
Martinez, Georgia 30907
Phone: 706-8MEDIC4 (863-3424)
Phone: 706-863-3474
Fax: 706-863-2316
mailto:info@xxxxxxxxxxxxxxxxx
"WE REPAIR WITH CARE"
SERVICE CENTERS PLEASE READ!!
1. Are you currently backed up or over-loaded?
2. Are you short a tech or have one on vacation?
3. Do you need help with a very difficult repair?
4. Would you like to make money jobbing the work out?
5. Would you like to ship out less profitable products so you can repair
others?
If you answered Yes to any of the above questions, Checkout these websites:
http://www.electricmedic.com/salesa.htm
or
http://www.electricmedic.com/shipping.htm
Factory Trained Authorized Service Center For: APEX, Fisher, GE, KEC/KTV,
Konka, Mitsubishi, Panasonic, Philips Magnavox, Pioneer, ProSCAN, RCA,
Samsung, Sanyo, Sharp, SONY, Technics, Toshiba, Zenith
Provide Extended care for: AON, Circuit City, GE Contracts, Glass Agency,
Philips Contracts, NEW, Rex
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Gary McCartney
Sent: Tuesday, December 10, 2002 1:36 AM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: Mode switch for these combos fix and
partnumber and cross
Jeff, thats great if you can get that much, but how do you manage to get
it? Do you still offer the long warranties that you once did? What do
you do if a unit requires major parts such as heads? Do you eat the cost
of the part, or do you offer to do the job for a higher amount? Around
here I can barely get $49.00 CDN for a VCR repair, unless it is a higher
end unit and the customer remembers paying $600.00 for it when it was
new, plus they also have to understand that the new ones are junk. I
remind people of the junk factor all the time but they still would
rather buy the Walleymart one year wonder. (wonder if it will work for a
year, that is, hehehe)
Gary McCartney
McCartney Electronics
7134 Fife Rd, RR 7
Guelph Ontario Canada N1H 6J4
Fax: (519)821-1530
email: gary (at) number63.ca
Jeff Dougherty wrote:
>
> I've started charging a flat $49.00 fee on VCR repairs. I can do most
repairs in
> one hour or less.
> Jeff@xxxxxxxxxxxxxxxxxx
> FAX 717-564-4952
> Jeff Dougherty
> Intrepid Video & Electronics Be careful of your thoughts.
> 501 Luther Rd They may become your words
> Harrisburg, PA 17111 any moment.
> 717-909-8844
> VCR tips, electronics info & general interest.
> www.intrepid-video.com www.tech-repair.net
> www.thetoolcaddy.com www.9-11-2001tragedy.com
> ***********************************************************************
>
> ----- Original Message -----
> From: "Leonard G. Caillouet" <lcaillo@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Monday, December 09, 2002 11:13 AM
> Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber
and
> cross
>
> How much labor do you all charge for these repairs?
>
> Leonard G. Caillouet
> Service Manager
> Electronics World
> Gainesville, FL
> 352-332-5608
> 352-332-5668 (fax)
>
> ----- Original Message -----
> From: "Jeff Dougherty" <support@xxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Sunday, December 08, 2002 8:59 PM
> Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber
> and cross
>
> >
> > Jose,
> > The part number is in the thread.
> > > >> > >All 3 needed the same rotary switch. Part number 483527617343
> >
> > Jeff@xxxxxxxxxxxxxxxxxx
> > FAX 717-564-4952
> > Jeff Dougherty
> > Intrepid Video & Electronics Be careful of your thoughts.
> > 501 Luther Rd They may become your words
> > Harrisburg, PA 17111 any moment.
> > 717-909-8844
> > VCR tips, electronics info & general interest.
> > www.intrepid-video.com www.tech-repair.net
> > www.thetoolcaddy.com www.9-11-2001tragedy.com
> > ***********************************************************************
> >
> > ----- Original Message -----
> > From: "JOSE R. PANIAGUA" <breadywater@xxxxxxx>
> > To: "techassist" <techassist@xxxxxxxxxxxxx>
> > Sent: Sunday, December 08, 2002 11:24 PM
> > Subject: [TechAssist] Re: Mode switch for these combos fix and
partnumber
> and
> > cross
> >
> >
> > hello: J Siverman
> > Can you please be so kind and at least give us the part # ,so if someone
> want to
> > order he can do it with it.
> > Thank you.
> > Jose R. Paniagua.
> > Breadywater@xxxxxxx
> >
> >
> > ----- Original Message -----
> > From: J Silverman
> > Sent: Sunday, December 08, 2002 1:20 PM
> > To: techassist@xxxxxxxxxxxxx
> > Subject: [TechAssist] Re: Mode switch for these combos fix and
partnumber
> and
> > cross
> >
> >
> > Over here, the newer Funai mode switches cost about $1.50. We usually
buy
> at
> > least 20 of a kind at a time directly from Funai Parts. At current shop
> > rates, $1.50 is equivalent to about 75 seconds of time, so it costs more
> to
> > repair than replace. However, a lot of them can be taken apart without
> > desoldering which saves about 30 seconds. Still cheaper to replace and
far
> > less chance of having to do it all over again free. Also the newest
switch
> > is so small and flimsy, if you even touch the fingers they just roll
over
> > and die.
> > I do save lots of the old switches for the day when they may become NLA.
> > Jerry Silverman
> > Greentron Inc
> > From: "Vilhelm Boor" <villyboor@xxxxxxxxx>
> > > I think you will find that it is a problem with the surface
of
> > the plastic, We have a series here where over the years I have gone from
> > advocating not to clean to cleaning them. This is my reason for using
the
> > finest grade of steel wool to resurface metal and plastic. Then a good
> wash
> > in hot water and detergent to get impurities from all surfaces. Now wash
> > again with contact cleaner and lightly coat with a silicone lubricant.
> > Retention the fingers and its as good as new
> > > >
> > > >yes--replace the mode switch. I have repaired a lot of mode switches
> > over
> > > >the years, and the only ones I have had too replace in the past were
in
> > > >really bad shape. These can look perfect, and fail. I don't know
> > > >why------yet
> > > >Jeff Farnsworth
> > , Lyles Tv wrote:
> > > >> > >I have 3 combos in here right now. With the help of people
here,
> I
> > > >found
> > > >> > that rebuilding/cleaning the mode switches like I have been doing
> for
> > > >> > years----don't work on these. I have trying to create a little
> > database
> > > >of
> > > >> > combo cross references as no one has been able to supply me with
> one.
> > > >The
> > > >> > three units I have here are
> > > >> > >Sylvania SSC092
> > > >> > >Phillips CCB092
> > > >> > >Symphonic WF-13C1
> > > >> > >All 3 needed the same rotary switch. Part number 483527617343
> > > >> > >Don't bother trying ness right now. I just ordered their last 2
> in
> > > >stock,
> > > >> > just 2 minutes ago
> > > >> > >I do have some more in my cross, but it is not in a presentable
> > format
> > > >> > yet. When I can donate something usable, i will up load it.
> > > >> > > Btw, the generally common symptom with these were "stuck tape"
> > > >> > >
> > > >>
> >
> > ------------------------------------------
> > Submit A Repair Tip For Everyone Here:
> > http://www.tech-assist.org/secure/tip/main.html
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
--
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
