[TechAssist] Re: Mode switch for these combos fix and partnumber and cross
- From: "tvservice" <tvservice@xxxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 10 Dec 2002 13:35:33 -0600
The $49.00 helps keep the door open
when your slow on work.
Although at the moment I'm 14-16 days behind and they are still stacking up
but I myself don't fix the VCR's
Robert
tvservice@xxxxxxxxxxxxxxxxxxx
H & H Electronics Inc
----- Original Message -----
From: "Joe Batchelor" <jbc@xxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, December 09, 2002 9:27 PM
Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber
and cross
>
> How much does is cost per hour?
> If you have a store front, it will cost much more than $49 per hour
> to keep the doors open.
>
> Joe Batchelor CET TX-80
>
> 12/9/02 6:33:09 PM, "Jeff Dougherty" <support@xxxxxxxxxxxxxxxxxx> wrote:
> >I've started charging a flat $49.00 fee on VCR repairs. I can do most
repairs in
> >one hour or less.
> >Jeff@xxxxxxxxxxxxxxxxxx
> >FAX 717-564-4952
> >Jeff Dougherty
> >Intrepid Video & Electronics Be careful of your thoughts.
> >501 Luther Rd They may become your words
> >Harrisburg, PA 17111 any moment.
> >717-909-8844
> >VCR tips, electronics info & general interest.
> >www.intrepid-video.com www.tech-repair.net
> >www.thetoolcaddy.com www.9-11-2001tragedy.com
> >***********************************************************************
> >
> >----- Original Message -----
> >From: "Leonard G. Caillouet" <lcaillo@xxxxxxxxxxxx>
> >To: <techassist@xxxxxxxxxxxxx>
> >Sent: Monday, December 09, 2002 11:13 AM
> >Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber
and
> >cross
> >
> >
> >
> >How much labor do you all charge for these repairs?
> >
> >Leonard G. Caillouet
> >Service Manager
> >Electronics World
> >Gainesville, FL
> >352-332-5608
> >352-332-5668 (fax)
> >
> >----- Original Message -----
> >From: "Jeff Dougherty" <support@xxxxxxxxxxxxxxxxxx>
> >To: <techassist@xxxxxxxxxxxxx>
> >Sent: Sunday, December 08, 2002 8:59 PM
> >Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber
> >and cross
> >
> >
> >>
> >> Jose,
> >> The part number is in the thread.
> >> > >> > >All 3 needed the same rotary switch. Part number 483527617343
> >>
> >> Jeff@xxxxxxxxxxxxxxxxxx
> >> FAX 717-564-4952
> >> Jeff Dougherty
> >> Intrepid Video & Electronics Be careful of your thoughts.
> >> 501 Luther Rd They may become your words
> >> Harrisburg, PA 17111 any moment.
> >> 717-909-8844
> >> VCR tips, electronics info & general interest.
> >> www.intrepid-video.com www.tech-repair.net
> >> www.thetoolcaddy.com www.9-11-2001tragedy.com
> >> ***********************************************************************
> >>
> >> ----- Original Message -----
> >> From: "JOSE R. PANIAGUA" <breadywater@xxxxxxx>
> >> To: "techassist" <techassist@xxxxxxxxxxxxx>
> >> Sent: Sunday, December 08, 2002 11:24 PM
> >> Subject: [TechAssist] Re: Mode switch for these combos fix and
partnumber
> >and
> >> cross
> >>
> >>
> >> hello: J Siverman
> >> Can you please be so kind and at least give us the part # ,so if
someone
> >want to
> >> order he can do it with it.
> >> Thank you.
> >> Jose R. Paniagua.
> >> Breadywater@xxxxxxx
> >>
> >>
> >> ----- Original Message -----
> >> From: J Silverman
> >> Sent: Sunday, December 08, 2002 1:20 PM
> >> To: techassist@xxxxxxxxxxxxx
> >> Subject: [TechAssist] Re: Mode switch for these combos fix and
partnumber
> >and
> >> cross
> >>
> >>
> >> Over here, the newer Funai mode switches cost about $1.50. We usually
buy
> >at
> >> least 20 of a kind at a time directly from Funai Parts. At current shop
> >> rates, $1.50 is equivalent to about 75 seconds of time, so it costs
more
> >to
> >> repair than replace. However, a lot of them can be taken apart without
> >> desoldering which saves about 30 seconds. Still cheaper to replace and
far
> >> less chance of having to do it all over again free. Also the newest
switch
> >> is so small and flimsy, if you even touch the fingers they just roll
over
> >> and die.
> >> I do save lots of the old switches for the day when they may become
NLA.
> >> Jerry Silverman
> >> Greentron Inc
> >> From: "Vilhelm Boor" <villyboor@xxxxxxxxx>
> >> > I think you will find that it is a problem with the surface
of
> >> the plastic, We have a series here where over the years I have gone
from
> >> advocating not to clean to cleaning them. This is my reason for using
the
> >> finest grade of steel wool to resurface metal and plastic. Then a good
> >wash
> >> in hot water and detergent to get impurities from all surfaces. Now
wash
> >> again with contact cleaner and lightly coat with a silicone lubricant.
> >> Retention the fingers and its as good as new
> >> > >
> >> > >yes--replace the mode switch. I have repaired a lot of mode
switches
> >> over
> >> > >the years, and the only ones I have had too replace in the past were
in
> >> > >really bad shape. These can look perfect, and fail. I don't know
> >> > >why------yet
> >> > >Jeff Farnsworth
> >> , Lyles Tv wrote:
> >> > >> > >I have 3 combos in here right now. With the help of people
here,
> >I
> >> > >found
> >> > >> > that rebuilding/cleaning the mode switches like I have been
doing
> >for
> >> > >> > years----don't work on these. I have trying to create a little
> >> database
> >> > >of
> >> > >> > combo cross references as no one has been able to supply me with
> >one.
> >> > >The
> >> > >> > three units I have here are
> >> > >> > >Sylvania SSC092
> >> > >> > >Phillips CCB092
> >> > >> > >Symphonic WF-13C1
> >> > >> > >All 3 needed the same rotary switch. Part number 483527617343
> >> > >> > >Don't bother trying ness right now. I just ordered their last
2
> >in
> >> > >stock,
> >> > >> > just 2 minutes ago
> >> > >> > >I do have some more in my cross, but it is not in a presentable
> >> format
> >> > >> > yet. When I can donate something usable, i will up load it.
> >> > >> > > Btw, the generally common symptom with these were "stuck
tape"
> >> > >> > >
> >> > >>
> >>
> >> ------------------------------------------
> >> Submit A Repair Tip For Everyone Here:
> >> http://www.tech-assist.org/secure/tip/main.html
> >> ------------------------------------------
> >> To REMOVE your email address, click here:
> >> http://www.tech-assist.org/unsubb.html
> >> To CHANGE your email address, click here:
> >> http://www.techassist.net/forms/change.html
> >
> >
> >------------------------------------------
> >Submit A Repair Tip For Everyone Here:
> >http://www.tech-assist.org/secure/tip/main.html
> >------------------------------------------
> >To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> >To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
> >
> >
> >
> >------------------------------------------
> >Submit A Repair Tip For Everyone Here:
> >http://www.tech-assist.org/secure/tip/main.html
> >------------------------------------------
> >To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> >To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
> >
>
>
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
>
>
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
