If your master cylinder is bad, you should be able to see brake fluid under the bus. I would also check all of the wheel cylinders as well. And all of the lines, of course. ________________________________ From: Ronnie <fracdogii@xxxxxxxxx> To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx> Sent: Thursday, March 20, 2014 11:27 AM Subject: [tcb] Master Cylinder Okay, so I'm on the home stretch on my '67 Westy and was bleeding the brakes. No matter how much brake fluid I ran through the system, I could not build up any pressure at all. Fluid was moving, just wouldn't get any pressure on the brakes. I think he shoes are adjusted fine, a little drag and e-brake works fine. Does this sound like the master cylinder is dead? The brakes sorta worked 15 months ago when I pushed it in the garage but nothing now. Any advice is welcome. Sent from my iPhone