[tcb] Re: Master Cylinder
- From: Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Thu, 20 Mar 2014 13:32:20 -0500
http://motiveproducts.3dcartstores.com/
DIY ---- this guy's videos are long and boring but VERY detailed
http://youtu.be/Mdcn1USVQ-w
http://youtu.be/crL8IoSylk8
G2
On Thu, 20 Mar 2014 10:57:12 -0700 (PDT)
Ronnie Hughes <fracdogii@xxxxxxxxx> wrote:
> **PLEASE NOTE: A power bleeder must be used when installing this
> master cylinder. This is necessary to fully evacuate air from the
> unit.
>
> This is from the WW website. Sounds like it may still have air in
> the system. I'll try adjusting the shoes out further and some more
> bleeding.
>
> At $185 at Northern Tool, I don't think I'll run down and get a power
> bleeder.
Other related posts:
