You can bench bleed it. Fill the reservoir and then depress the cylinder in and out. Always bench bleed a master if you can.. On Thu, Mar 20, 2014 at 12:57 PM, Ronnie Hughes <fracdogii@xxxxxxxxx> wrote: > **PLEASE NOTE: A power bleeder must be used when installing this master > cylinder. This is necessary to fully evacuate air from the unit. > > This is from the WW website. Sounds like it may still have air in the > system. I'll try adjusting the shoes out further and some more bleeding. > > At $185 at Northern Tool, I don't think I'll run down and get a power > bleeder. > >