[riscos-printing] Re: Epson R360 Banding for the first time
- From: Martin Wuerthner <lists@xxxxxxxxxxxxxxx>
- To: riscos-printing@xxxxxxxxxxxxx
- Date: Fri, 13 Mar 2009 10:56:22 +0100
In message <503b4fb7e5Ian_Hamilton@xxxxxxxxxxxxxxxx>
Ian Hamilton <Ian_Hamilton@xxxxxxxxxxxxxxxx> wrote:
> In article <a9a14c3b50.Gary@xxxxxxxxxxxxxxxxxxxxx>, Gary Jones
> <localnews@xxxxxxxxxxxx> wrote:
>> I've tried all the different interleave method settings and they seem
>> to have no effect. The only thing that helps is changing the dpi. I
>> have tried 720x360 - banding less noticeable. At 720x720 again banding
>> is there but much finer - less than 1mm apart.
> [Snip]
> With inkjet models if the printer has to wait for more data from the
> computer it's likely to show some banding. It's better to create the
> print 'to file' and then send it to the printer so it's printed in one go
> (PrintSpool without the 'Simultaneous printing' option does this).
Thanks, but I do not think that can be the issue here. After all, it
worked fine with earlier versions of GPDriver.
Martin
--
---------------------------------------------------------------------
Martin Wuerthner MW Software lists@xxxxxxxxxxxxxxx
---------------------------------------------------------------------
------------------------------------------------------------
To change, suspend or cancel your subscription go to
//www.freelists.org/list/riscos-printing
------------------------------------------------------------
Other related posts:
