[riscos-printing] Re: Epson R360 Banding for the first time
- From: Brian <brferris@xxxxxxxxxxxxxxxxx>
- To: riscos-printing@xxxxxxxxxxxxx
- Date: Wed, 11 Mar 2009 13:03:38 GMT
In message <20090311050827.59F24BFC90F@xxxxxxxxxxxxxxxxxxxx>
FreeLists Mailing List Manager <ecartis@xxxxxxxxxxxxx>
wrote:
> riscos-printing Digest Tue, 10 Mar 2009 Volume: 04 Issue: 024
> In This Issue:
> [riscos-printing] Re: Epson R360 Banding for the first time
> [riscos-printing] Re: Epson R360 Banding for the first time
> [riscos-printing] Re: Epson R360 Banding for the first time
> [riscos-printing] Re: Epson R360 Banding for the first time
> ----------------------------------------------------------------------
> Subject: [riscos-printing] Re: Epson R360 Banding for the first time
> From: Gary Jones <localnews@xxxxxxxxxxxx>
> Date: Tue, 10 Mar 2009 20:29:36 GMT
> In message <e01b9a3350.BrianFerris@xxxxxxxxxxxxxxxxxxxxxxxxxx>
> Brian <brferris@xxxxxxxxxxxxxxxxx> wrote:
>> Hi
>> Reading through the replies, the printer never had banding before.
>> The pics I tried haven't been rotated or even cropped.
>> Print spooler isn't used.
>> I still get banding if using 720x360 dpi 720, 1440 x720.I've never
>> used the higher dpi as I've never had issues before.I haven't used
>> anything below 720dpi.
>> I used to have it set on ' best ' but now there seems to be more
>> options there ?
>> Brian
>>
> I purchased an Epson S20 printer when the previous 'test' version was
> released and I don't recall seeing any banding. However, with this
> version I'm noticing banding for the first time on graphics and shaded
> areas.
> I mainly use my printer for word processing with graphics at 360dpi
> and occasionally 720dpi (no photos) which in the past has been
> perfectly acceptable for documents.
> I guess I can live with it but it the output now is slightly worse
> than before.
> Gary
I too have problems now and I didn't before.
Using txt and photographs on a simple newsletter I get banding which I
never got before.
I always have it at 720x360 dpi, colour and high quality.
The output was always very, very good.
Now there is banding and it seems more options, which I never had
before, so I don't know if these need to be selected. I also had to
increase the gamma ( known issues with Epson and GPrint)
Thats why I posted this before to the mailing list to see if others
had noticed a change in their set up ?
Brian
--
Check out Brian's pics at:
www.dslruser.co.uk/cpg1410/index.php?cat=19774
or at www.flickr.com/photos/httpflickrcomphotosbrian/
------------------------------------------------------------
To change, suspend or cancel your subscription go to
//www.freelists.org/list/riscos-printing
------------------------------------------------------------
Other related posts:
