[pure-silver] Re: Sink Decisions and Waterproofing
- From: Claudio Bonavolta <claudio@xxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Thu, 21 Jul 2005 09:24:17 +0200
Thanks Walter,
I just drilled a hole in the fitting and filled the inside with epoxy.
I just can't remember if I added a layer of silicone caulking over the epoxy or
not ...
Regards,
Claudio Bonavolta
http://www.bonavolta.ch
----- Message d'origine -----
De: "Walter Jourdan" <walterjourdan@xxxxxxxxxxx>
Date: Thu, 21 Jul 2005 09:13:47 +0200
Sujet: [pure-silver] Re: Sink Decisions and Waterproofing
À: <pure-silver@xxxxxxxxxxxxx>
>Very nice darkroom, Claudio!!
>How did you mount the thermometer sensor into the fitting??
>
>Regards
>Walter
>-----Ursprüngliche Nachricht-----
>Von: "Claudio Bonavolta" <claudio@xxxxxxxxxxxx>
>An: <pure-silver@xxxxxxxxxxxxx>
>Gesendet: Dienstag, 19. Juli 2005 10:48
>Betreff: [pure-silver] Re: Sink Decisions and Waterproofing
>
>
>
>----- Message d'origine -----
>De: DarkroomMagic <info@xxxxxxxxxxxxxxxx>
>Date: Mon, 18 Jul 2005 23:43:32 +0200
>Sujet: [pure-silver] Re: Sink Decisions and Waterproofing
>À: PureSilverNew <pure-silver@xxxxxxxxxxxxx>
>
>>You can build your own 2x4 support for the Delta sinks, no problem, if you
>>get the angle front-to-back right. In other words, it is not just a
>>rectangular frame. However, the steel frames are easy to put up, easy to
>>take apart, light and look good enough. I saw no need to make my own.
>>
>>My policy is to go the do-it-yourself route only if I can't buy it or if it
>>is outragiously expensive. I don't dot it myself, just because I can. I
>need
>>my spare time for photography not for carpentry. On the other hand, it's
>>feels good when you can do it yourself. Very satisfying and a reason to
>show
>>it off with pride. Nothing wrong with that either.
>
>>
>>Regards
>
>>Ralph W. Lambrecht
>>
>>http://www.darkroomagic.com
>
>
>I decided to build mine for three reasons:
>- availability, sinks are difficult to obtain where I live
>- dimensions, I was able to dimension it exactly how I wanted to be
>- price, due to the reduced availability, shipping charges from the States
>are just impossible ...
>
>The design is very simple and similar to Jim's one:
>http://www.bonavolta.ch/hobby/en/photo/sink.htm
>
>I also built the water panel for the same reasons:
>http://www.bonavolta.ch/hobby/en/photo/waterpanel.htm
>
>Regards,
>Claudio Bonavolta
>http://www.bonavolta.ch
>====================================To unsubscribe from this list, go to
>www.freelists.org and logon to your account (the same e-mail address and
>password you set-up when you subscribed,) and unsubscribe from there.
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.0.323 / Virus Database: 267.9.1/51 - Release Date: 18.07.05
>
>=============================================================================================================
>To unsubscribe from this list, go to www.freelists.org and logon to your
>account (the same e-mail address and password you set-up when you subscribed,)
>and unsubscribe from there.
>
>
============================================================================================================To
unsubscribe from this list, go to www.freelists.org and logon to your account
(the same e-mail address and password you set-up when you subscribed,) and
unsubscribe from there.
Other related posts:
