[pure-silver] Re: Developing Plus-X in Rodinal 1+100
- From: Tim Daneliuk <tundra@xxxxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Sun, 14 Dec 2008 12:41:40 -0600
Bogdan Karasek wrote:
> Hi,
>
> I'm planning on shooting some 120 Plus-X at the rated 125 iso and I want
> to develop it in Rodinal 1+100. I checked the Massive development Chart
> and it gives 6 min for Rod 1+25 and 13 min for Rod 1+50. What would be
> the extrapolation for the time if I developed in Rod 1+100? I figure a
> ballpark time of around 18-19 minutes. Does somebody have a more
> precise time?
>
> In passing, is 125 iso a good starting point or should I be shooting
> with a lower iso, say 64. Haven't used Plus-X since high school in the
> 60's, so I am unfamiliar with what I assume is an updated version of
> Plus-X or has it stayed essentially the same emulsion?
>
> Any info about Plus-X would be appreciated, pros and cons.
>
> Cheers,
> Bogdan
>
I shoot PX at ASA 64, and develop in HC-110 or D-76 or PMK Pyro
depending on the subject. In all cases - assuming your thermometer
and timers are OK, start with a dev time about 20% shorter than
recommended.
--
----------------------------------------------------------------------------
Tim Daneliuk tundra@xxxxxxxxxxxxxx
PGP Key: http://www.tundraware.com/PGP/
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts: