[mso] Re: Old Problem with normal doc
- From: "Dian Chapman" <dian@xxxxxxxxxxxxx>
- To: <mso@xxxxxxxxxxxxx>
- Date: Thu, 12 Jun 2003 17:12:55 -0500
Note! I just got a notice back from the admin and it's NOT logical
expressions' down server at all. It's these damn =3D3D chars that find =
their
way into posts around here!!! I never paid too much attention to the =
problem
with how they get in all these messages and muck them up, but the =
servers
are find and TechTrax is/was always up and running. The links just got
messed up due to a renegade 3D that slipped into the URL.
The URL that showed up in the message was this:
http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID=3D3D189
Yet the REAL URL that I posted to the mess was this:
http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID=3D189
Now if it messed up again...it SHOULD be just the
pubs.logicalexpressions.com and then our Pub number for TechTrax, which =
is
/Pub0009/ and then the LPMArticle.asp? listing for the Logical =
Expressions
Publication Manager Article and then the actual article ID...which in =
the
above case was ID=3D189.
I know this happened once before here, too. So if it happens again, all =
I
can say is that there should not be any 3D code in the URLs, it should =
be
like this:
pubs.logicalexpressions.com
/pub0009/
LPMArticle.asp?
ID=3D[whatever article #]
Dian Chapman
Technical Consultant
& Microsoft MVP
Free Word Tips & Tricks eBook: http://www.mousetrax.com/books.html
Free Tutorial site: http://www.mousetrax.com/techpage.html
Free Support Ezine: http://www.mousetrax.com/techtrax/
=20
-----Original Message-----
From: mso-bounce@xxxxxxxxxxxxx [mailto:mso-bounce@xxxxxxxxxxxxx] On =
Behalf
Of Neil Atwood
Sent: Thursday, June 12, 2003 3:57 PM
To: mso@xxxxxxxxxxxxx
Dian,
I'm getting 500 server errors on all those URLS you've pointed to below =
and
in your previous email... I suspect incorrect syntax there somewhere or =
a
web server config problem... ;-)
____________________________________
Neil Atwood - Sydney, Australia=20
"If you want to improve your understanding, drink coffee; it is the
intelligent beverage."
Sydney Smith
=20
=20
:
:-----Original Message-----
:From: mso-bounce@xxxxxxxxxxxxx=20
:[mailto:mso-bounce@xxxxxxxxxxxxx] On Behalf Of Dian Chapman
:Sent: Friday, 13 June 2003 6:37 AM
:To: mso@xxxxxxxxxxxxx
:
:Linda is on a much needed vacation right now. So allow me=20
:to pass you =3D
:this
:TechTrax article which explains how to move around in=20
:Windows to find =3D
:what
:you need...
:
=
:http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID=3D3D189
:
:And also this TechTrax article which explains Normal.dot.
:
=
:http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID=3D3D151
:
:And finally...know that you can download Greg's free Word=20
:Options =3D
:Utility
:(see this article for details and download link:
:http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?
:ID=3D3D162) =3D
:which will
:show you where all the options folder are and what your=20
:option settings =3D
:are
:set to. This will show you where your normal.dot template=20
:is located (in =3D
:the
:template dir) so you'll have the path.=3D20
:
:Once you have that, it's just a matter or learning how to=20
:turn on the =3D
:file
:extensions in Windows to see them. And that's explained=20
:in the first
:article.
:
:
:Dian Chapman
:Technical Consultant
:& Microsoft MVP
:
:Free Word Tips & Tricks eBook: http://www.mousetrax.com/books.html
:Free Tutorial site: http://www.mousetrax.com/techpage.html
:Free Support Ezine: http://www.mousetrax.com/techtrax/
: =3D20
:
:
:
:-----Original Message-----
:From: mso-bounce@xxxxxxxxxxxxx=20
:[mailto:mso-bounce@xxxxxxxxxxxxx] On =3D
:Behalf
:Of Jan Robey
:Sent: Thursday, June 12, 2003 5:39 AM
:To: mso@xxxxxxxxxxxxx
:
:Hi Linda,
:Yesterday I spent time with the senior who has this=20
:problem & I followed
:your instructions to the letter. After following each step
:carefully...three times...I still could not find=20
:normal.dot. So the =3D
:problem
:still persists. I will be seeing her again next week. =20
:Please try to =3D
:figure
:this one out.
:
:I don't know what I could be doing wrong. Your=20
:instructions are quite
:clear.
:
:Thanks
:Jan
*************************************************************
You are receiving this mail because you subscribed to mso@xxxxxxxxxxxxx =
or
MicrosoftOffice@xxxxxxxxxxxxxxxx
To send mail to the group, simply address it to mso@xxxxxxxxxxxxx
To Unsubscribe from this group, send an email to =
mso-request@xxxxxxxxxxxxx
with the word "unsubscribe" (without the quotes) in the subject line.
Or, visit the group's homepage and use the dropdown menu. This will =
also
allow you to change your email settings to digest or vacation (no mail).
//www.freelists.org/webpage/mso
To be able to use the files section for sharing files with the group, =
send a
request to mso-moderators@xxxxxxxxxxxxx and you will be sent an =
invitation
with instructions. Once you are a member of the files group, you can go
here to upload/download files:
http://www.smartgroups.com/vault/msofiles
*************************************************************
*************************************************************
You are receiving this mail because you subscribed to mso@xxxxxxxxxxxxx or
MicrosoftOffice@xxxxxxxxxxxxxxxx
To send mail to the group, simply address it to mso@xxxxxxxxxxxxx
To Unsubscribe from this group, send an email to
mso-request@xxxxxxxxxxxxx with the word "unsubscribe" (without the quotes) in
the subject line.
Or, visit the group's homepage and use the dropdown menu. This will also allow
you to change your email settings to digest or vacation (no mail).
//www.freelists.org/webpage/mso
To be able to use the files section for sharing files with the group, send a
request to mso-moderators@xxxxxxxxxxxxx and you will be sent an invitation with
instructions. Once you are a member of the files group, you can go here to
upload/download files:
http://www.smartgroups.com/vault/msofiles
*************************************************************
Other related posts:
