[LRflex] Re: Using the M6
- From: David Simms <simmszee@xxxxxxxx>
- To: leicareflex@xxxxxxxxxxxxx
- Date: Tue, 5 Jan 2010 21:17:25 -0800 (PST)
Nice work, by the way. You guys know how to party, down there.
Dave
________________________________
From: Sonny Carter <sonc.hegr@xxxxxxxxx>
To: leicareflex@xxxxxxxxxxxxx
Sent: Tue, January 5, 2010 9:08:36 PM
Subject: [LRflex] Re: Using the M6
Guys, you're working too hard at this. Just get out there and take pictures
until you get used to the M6. It is not that critical in most cases. If
you are into high precision, then you need a spot meter, not the internal
meter.
With the M6, I would just about always go with what the camera said, for
print film.
If I was not close enough to get an exposure off a person's face, I usually
would take a reading off my hand. This went for M5's and m7's which I also
used.
Tina said she often would take her exposure off the ground in front of her
as a useful base exposure.
--
Regards,
Sonny
http://www.sonc.com
http://sonc.stumbleupon.com/
Natchitoches, Louisiana
(+31.754164,-093.099080)
USA
------
Unsubscribe or change to/from Digest Mode at:
http://www.lrflex.furnfeather.net/
Archives are at:
//www.freelists.org/archives/leicareflex/
__________________________________________________________________
Make your browsing faster, safer, and easier with the new Internet Explorer® 8.
Optimized for Yahoo! Get it Now for Free! at
http://downloads.yahoo.com/ca/internetexplorer/
------
Unsubscribe or change to/from Digest Mode at:
http://www.lrflex.furnfeather.net/
Archives are at:
//www.freelists.org/archives/leicareflex/
Other related posts:
