[iyonix-support] Re: DVI on Iyonix
- From: tennant@xxxxxxxxxxxxxxxxx (Tennant Stuart)
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Fri, 16 Feb 2007 20:52:01 +0000
On Thu 15 Feb 2007 (10:54:01 +0000), Dave Higton wrote:
>Quoting Tennant Stuart <tennant@xxxxxxxxxxxxxxxxx>:
>
>> I have a 32" LCD 1366x768 TV with "PC input", and its handbook says
>that
>> it supports the following resolutions at 60 Hz / 70 Hz / 75 Hz...
>>
>> VGA 640 x 480
>> SVGA 800 x 600
>> XGA 1024 x 768
>> SXGA 1280 x 1024
>>
>> ..so what scaling/letterboxing/cropping would those be displayed at?
>>
>> The Iyonix supports those screen modes of course, but does it output
>the
>> correct signals/voltages/etc for such an LCD television set?
>
>If it has a standard VGA connector, then it accepts standard VGA
>voltages.
The TV set input has three rows of five pins; while the Iyonix has a row
of five pins, and a row of four pins. Its monitor has no input socket.
> If it accepts standard VGA/SVGA/XGA/SXGA PC inputs, then
>it accepts standard signals at standard frequencies...
>
>I have no idea why you should imagine differently.
Because of the hoops we used to jump through to connect older Acorns,
with some lines severed, others joined together, and some earthed.
> Just connect it up and enjoy.
Or connect it up and lament.
>Oh, and let us know the results!
That's what my Iyonix-owning friends say, two of whom have the same TV.
Tennant
--
_ ________________________________________
( _ .|_ ||_ _ |_ /
_)(_)(_)||_)||_ ( )|_ / Why does *he* get to use his name?
______________________/ tennant@xxxxxxxxxxxxx
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
Other related posts:
