On Wed 07 Mar, Tennant Stuart wrote: > > On Tue 6 Mar 2007 (09:26:06 +0000), David Rruck wrote: > >tennant@xxxxxxxxxxxxxxxxx (Tennant Stuart) wrote: > > >> > > Now all I need is an MDF for 1366 x 768 at 60/70/75Hz... pretty > >> > please? > > > >[snip] > > > >> Thanks Dave, but that doesn't work - the screen becomes a mess of > >> diagonal streaks, running from upper left to lower right. I guess > >> that they're due to faulty timing parameters, part of what makes > >> !MakeModes so hard to use. :( > > >Well to get any further you either need to experiment using !MakeModes, > >or find the exact timing parameters, either from the monitor > >documentation, or from a PC driver information file. > > More than 15 seconds then... and what's a PC driver information file? > > Anyway, it's of no consequence now, since Eric has solved the problem by > pointing out that 1366 can't be the right number. I've checked with the > instruction manual, and that is what's given; it must be a mistake. No mistake! The monitor manufacturer could make tit 1367 pixels wide. The problem is the RISC OS video system which expects the total horizontal pixels to be divisible by 4 or 8 (dependant on mode used and OS version?) Chris Evans -- CJE Micro's / 4D 'RISC OS Specialists' Telephone: 01903 523222 Fax: 01903 523679 chris@xxxxxxxxxxxxxxx http://www.cjemicros.co.uk/ 78 Brighton Road, Worthing, West Sussex, BN11 2EN The most beautiful thing anyone can wear, is a smile! --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support