[iyonix-support] Re: Booting doesn't complete
- From: Gavin Wraith <gavin@xxxxxxxxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Sun, 16 Dec 2007 19:00:48 GMT
In message <6cf436524f.D_Lane@xxxxxxxxxxxxxxxxxxxx> you wrote:
> Lately Nixiyo, my Iyonix PC, often stops part way through the
> boot sequence. When this happens, it usually stops during the
> pre-desktop phase after printing some of the lines to screen. The
> exact point at which it stops varies. Once it stopped during the
> desktop phase. In either case I have to switch off and start again
> -- the reset button doesn't do anything. Then it usually completes
> the boot-up satisfactorily.
>
> What does it mean?
>
> It seems to happen randomly. I have known this to happen in the
> past, but only isolated instances and so not worth reporting.
>
> I have not added anything to the boot sequence. Presumably, if it
> was a software fault with the boot, the problem would occur on
> every boot-up.
David
The randomness suggests to me that it might be something to do
with the PSU, or even a loose connection.
--
Gavin Wraith (gavin@xxxxxxxxxxxxxxx)
Home page: http://www.wra1th.plus.com/
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
Other related posts:
