[PCB_FORUM] Re: Kicks me out!

Thanks Mike, I'll give that a try.

 

Regards,

Gary

 

  

Gary E. MacIndoe
PCB Design Engineer
Fort Collins, Colorado

amd.com

gary.macindoe@xxxxxxx

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Finczak
Sent: Wednesday, May 14, 2008 3:56 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Kicks me out!

 

Gary,

      A couple years back, we had one machine that had ramdom

      crashes in Allegro. It turned out to be a memory stick.

 

      We were able to detect the bad memory location by using a

      memory dignostic progrm that ran several bit pattens tests.

 

      You can download a free copy of MemTest+ v2.01 from:

 

               http://www.memtest.org/#downiso

 

      The DOS iso zip file will create a self booting floppy disk.

 

Regards,

       Mike Finczak

       CopperCAD Design

       www.CopperCAD.com

       905-488-8958

 

 

 

________________________________

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx

[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary

Sent: Wednesday, May 14, 2008 5:26 PM

To: icu-pcb-forum@xxxxxxxxxxxxx

Subject: [PCB_FORUM] Re: Kicks me out!

 

 

 

Hey Tony,

 

 

 

Sorry, it's 15.5.1 on Windows XP Pro.

 

 

 

No, it's not necessarily repeatable. I started a spin on a design: save

as to new rev, import Logic, went to do a Show Element on a component,

then BAM!!

 

 

 

I had it happen recently on a different board, but hadn't seen it happen

before that in quite a while.

 

 

 

Thanks!

 

 

 

Gary

 

 

 

 

 

Gary E. MacIndoe

PCB Design Engineer

Fort Collins, Colorado

 

amd.com

 

gary.macindoe@xxxxxxx

 

________________________________

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx

[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Cosentino, Tony

Sent: Wednesday, May 14, 2008 1:41 PM

To: icu-pcb-forum@xxxxxxxxxxxxx

Subject: [PCB_FORUM] Re: Kicks me out!

 

 

 

Gary, 

 

 

 

What version of the software are you running on? and is the application

error repeatable? Meaning can you replay your design and get it to fail

again running the exact same commands. I normally do this by converting

my .jrl to a .scr and replay it. If I can get it to crash again using

the exact same commands then I send the database along with the script

back to Cadence.

 

 

 

Tony Cosentino

 

________________________________

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx

[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary

Sent: Wednesday, May 14, 2008 3:17 PM

To: icu-pcb-forum@xxxxxxxxxxxxx

Subject: [PCB_FORUM] Kicks me out!

 

Hey guys,

 

 

 

This ugly situation has been happening more frequently lately.

 

 

 

The window below pops up, then hands you the gun to put to you head!

 

 

 

Anyone know what the cause is?

 

 

 

Gary

 

 

 

 

 

 

 

 

 

Gary E. MacIndoe

PCB Design Engineer

Fort Collins, Colorado

 

amd.com

 

gary.macindoe@xxxxxxx

 

 

 

 

-----------------------------------------------------------

To subscribe/unsubscribe: 

Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx

with a subject of subscribe or unsubscribe

 

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

 

Problems or Questions:

Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

-----------------------------------------------------------

GIF image

Other related posts: