> Hi, > I'm looking into implementing full multi-port support in usb_midi. > Not quite sure yet how tricky it's going to be, but I have one > initial > question to put to the wider expertise. > > I currently have two MIDI-USB interfaces plugged in, and they appear > as /dev/midi/usb/0 and /dev/midi/usb/1. However, one of them is > actually a two-port device (of which I can only currently access > the first), so both ports will have to eventually show up as separate > devices. > > My question is: should the ports appear as (say) /dev/midi/usb/1 > and /dev/midi/usb/2, or -- as they're actually a single device -- > as /dev/midi/usb/1/0 and /dev/midi/usb/1/1 -- one extra level down? > > Thanks, > -- Pete -- > > Haiku has a usb midi driver ??? huh, I'll have to get out my kx88 controler and see if it works with it. Sean