Alright. So I built a graphic with a single digit on it. In Display Configurator, I set the "contents<" entry to CMPD:TESTAI.HLGP, and the "contents>" entry also to CMPD:TESTAI.HLGP (I used the Default Path pick in Display Configurator to make sure they were the same). Is the latter of those two not an action ending in .HLGP? The small bit of the Foxdraw documentation I looked at implies it is not (but why in the world would I look there, I'm using DM :). The Display Manager Commands document, though, says (as you quote below): "This allows the generic name .OUT to apply to all output active areas, including both those on Block Detail Displays and preconfigured Group Displays." which implies that it is. The results were as follows (maybe no surprise to anyone but me): When I do pref -DMNAME DMCMD "dmcmd protect name .HLGP nothing changes. I can still select the digit and change the group number (I know this because the input connection updates). When I do pref -DMNAME DMCMD "dmcmd protect all" I cannot select the digit at all. Corey Clingo BASF Corporation "Johnson, Alex P \(IPS\)" <alex.johnson@xxxxxxxxxxxxxxxx> Sent by: foxboro-bounce@xxxxxxxxxxxxx 05/22/2007 12:21 PM Please respond to foxboro@xxxxxxxxxxxxx To <foxboro@xxxxxxxxxxxxx> cc Subject Re: [foxboro] "protect name .PARM" DM/FV command Cory, Per the documentation: name =3D name is a list of the action names to be protected. This list contains no spaces. Names are separated by commas. If specifying action names starting with a "." (for example, .OUT), all action names ending with this string are affected. For example: protect name .OUT protects all action names ending with .OUT. This allows the generic name .OUT to apply to all output active areas, including both those on Block Detail Displays and preconfigured Group Displays. The key here is that this command protects named actions in a display. It does not protect changes to a CBP. You can read about actions in the FV/FD documentation. = Regards, Alex Johnson Invensys Systems, Inc. 10900 Equity Drive Houston, TX 77041 713.329.8472 (voice) 713.329.1700 (fax) 713.329.1600 (switchboard) alex.johnson@xxxxxxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Corey R Clingo Sent: Tuesday, May 22, 2007 11:22 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] "protect name .PARM" DM/FV command Simple version: has anyone ever gotten this to work? Longer version: I came across this while looking for something else in the = docs, and thought, how could I not have seen this before? It would solve, = or at least mitigate, a great deal of issues for me (e.g., all those = parameters that are settable but not connectable, and we don't want people = to be able to set them). So I tried the following: pref -DMNAME DMCMD "protect name .HLGP" and = called up a detail display. Unfortunately, it still happily let me change = the hi/lo alarm destination. I then did pref -DMNAME DMCMD "protect all", = and it no longer let me select it, so my pref was working. Am I doing something wrong? Or is this going to be a "new feature" in = Foxview 12? Corey Clingo BASF Corporation = = _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html = foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave = Confidentiality Notice: The information contained in this electronic message and any attachment(s) = to this message are intended for the exclusive use of the recipient(s) and = may contain confidential, privileged or proprietary information. If you are= not the intended recipient, please notify the sender immediately, delete a= ll copies of this message and any attachment(s). Any other use of the E-Mai= l by you is prohibited. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave