True. This mechanism is not foolproof, even if it had worked as I envisioned/desired. But it would eliminate 90-95% of the issues, and prevent all that typing of loopback connections in situations where changes were not desired, but it wouldn't be the end of the world if they happened. I was just salivating for a moment or two at the prospect of several lines of "protect name .DONTTOUCHTHIS" lines in an environment script to protect a desired list of parameters, rather than a combination of locking them, having some enforcer application set them back when they changed (for all those settable/non-connectable ones), or d_edit'ing all the faceplates and details to control access via protection classes - on every system upgrade (but then again I'm toying with the idea of making my own, as I find the system-supplied ones lacking in several areas, so maybe that last one is not such a big deal). Corey Clingo BASF Corporation "Wilson, Brad" <brad.wilson@xxxxxxxxxxxxxxxx> Sent by: foxboro-bounce@xxxxxxxxxxxxx 05/23/2007 07:47 AM Please respond to foxboro@xxxxxxxxxxxxx To <foxboro@xxxxxxxxxxxxx> cc Subject Re: [foxboro] "protect name .PARM" DM/FV command -----Original Message----- From: Johnson, Alex P (IPS) Sent: Wednesday, May 23, 2007 12:19 AM The relative picks in some of the faceplates have been configured with action names. For example, the OUT relative pick on the PID faceplates have the name .OUT. If you call in a PID detail display and issue the command pref dmcmd "protect name .OUT" the relative pick for the .OUT parameter is no longer pickable. -----Original Message----- If a protected element is not "pickable", it would still be "changeable" by other means, correct? For example, if a display has user-defined up/down buttons that change the .OUT parameter without a pick, then the above protection method would not work. Some considerable thought needs to be invested when designing and building a display if selected (not global) protection is (or may) be desired. Brad Wilson brad.wilson@xxxxxxxxxxxxxxxx Invensys Systems, Inc 1090 King Georges Post Rd, Suite 204 Edison, NJ 08837 732-874-0087 Confidentiality Notice: The information contained in this electronic message and any attachment(s) = to this message are intended for the exclusive use of the recipient(s) and = may contain confidential, privileged or proprietary information. If you are= not the intended recipient, please notify the sender immediately, delete a= ll copies of this message and any attachment(s). Any other use of the E-Mai= l by you is prohibited. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave