For starters, see if this helps: http://www.thecassandraproject.org/archive.html under "OTHERS" go to "xterm80.pdf". That manual has a lot of information you may be looking for. I use Exceed , but I know there are a number of "free" packages out there. I have "D" and "E" boxes, but I'm sure there are members on the list who have done this with "B" boxes. Wally Magda IE&C Spec Sr Colorado Springs Utilities PO Box 214 660 W. Monument Creek Rd USAF Academy, CO 80840 719.668.9502 office wmagda@xxxxxxx "BrianLong" Sent by: foxboro-bounce@xxxxxxxxxxxxx 03/23/2005 02:42 PM Please respond to foxboro@xxxxxxxxxxxxx To "Foxboro" <foxboro@xxxxxxxxxxxxx> cc Subject [foxboro] X Terminal I'm thinking of installing a few "X terminals" but am in need of some explanations and/or recommendations on hardware and software setups. I plan to tie to "B" boxes and use DM. Thanks, Brian Long Arkansas Kraft _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
