Re: [foxboro] X Terminal

What kind of x-terminal do you have?  Is this a PC running Windows with 
Hummingbird Exceed used as an x-terminal emulator?

Check and see if you just need to allow Exceed to connect, open a vt100 
window from the AW and type "xhost +" see if Exceed can connect now. 
After checking, run "xhost -" to disable access control.

Consider reading the excellent setup documentation written by Ron Deen 
and hosted by he Cassandra project web site:
http://www.thecassandraproject.org/archive.html, look for xterm.pdf

Which manual were you following in FoxDoc, and which version of Exceed 
are you using?

Regards,

Kevin FitzGerrell
Systems Engineer
Foxboro New Zealand
+64 9 573 7690

Walied Barakat wrote:
> No, it has a floppy drive and CDROM drive.
> And teh X Terminal is up and running.
> Here below is what I did:
> I used exceed installed on the X-terminal to access teh AW, but an error 
> message appeared that AW can not accessed with that command.
> Then I tried to change the "hosts" file, and the"netmasks" file with the 
> X-terminal information with negative result.
> Do I have to do something else on the AW. And which CD you are talking about, 
> Which CD label, so I ask to search.
>  
> Regards
>  
> 
> Mark Dumond <mdumond@xxxxxxxxxxxxxx> wrote:
> Is the X-Terminal diskless?
> If so, the X-Terminal usually requires a bootup (bootp) host, which was
> probably your AW.
> You are probably missing the X-Terminal bootup files on your AW, and
> probably need to configure bootp - all of which would happen =
> automatically
> if you have the X-terminal CD.
> 
> Mark Dumond
> FeedForward, Inc
> 
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] =
> On
> Behalf Of Walied Barakat
> Sent: Tuesday, October 26, 2004 7:01 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] X Terminal
> 
> 
> Hi, list
> =20
> I am facing a situation where somebody reinstalled DAY0 to an AW, and =
> did a
> manual restore (not everything). Now teh X-Terminal connected to that
> ststion originally can not access that AW. What I should do to =
> reconfigure
> that AW again other than:
> 1- change teh hosts file
> 2- change teh netmasks file
> =20
> It mentioned in fox doc that I have to use a X-Terminal CD!!!
> =20
> Does any body has an answer?
> =20
> Regards to all of you.
> 
> =09
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail Address AutoComplete - You start. We finish.
> 
> =20
> =20
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at =
> your
> own risks. Read http://www.thecassandraproject.org/disclaimer.html
> =20
> foxboro mailing list: http://www.freelists.org/list/foxboro
> to subscribe: =
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
> to unsubscribe: =
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
> =20
> 
> 
> 
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> 
> foxboro mailing list: http://www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
> 
> 
>               
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail Address AutoComplete - You start. We finish.
> 
>  
>  
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>  
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>  
> 
> 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: