[ddots-l] Re: technical question
- From: Stephen Giannaros <stephen.giannaros@xxxxxxxxx>
- To: ddots-l@xxxxxxxxxxxxx
- Date: Sat, 12 May 2012 19:49:58 -0400
Nice!! Everything works fine now. I am back to JAWS 11 and
reinstalled CT and now I’m able to do everything as I was before.
Thanks to all of you who helped me figure this out. I really
appreciate it.
Steve
On 5/12/12, Mark Dew <jmkeybd1@xxxxxxxxxxx> wrote:
> Stephen, I had the same problem a couple of months ago.
> Mine just started to happen on a system I been using a long time.
> The paste issue was my biggest problem.
> The list tried to help with out any results.
> I deleted everything and started from scratch.
> Nothing helped.
> Finally when Danceing dots had the special on upgrading to 8.5, I jumped on
>
> it.
> Don't know what the difference is, but for me it fixed everything.
> Don't forget to start your projects with one of the aaa tempalates.
> This I found out is necessary.
> I hope you solve your problems, I'll be watching to see if there is a answer
>
> for you.
>
>
> Mark
> My WEBSITE
> http://www.markdew.com
>
> ----- Original Message -----
> From: "Rui Vilarinho" <ruialby@xxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Saturday, May 12, 2012 4:13 PM
> Subject: [ddots-l] Re: technical question
>
>
>> Strange !
>> Well, check the step by step windows version recommended configurations,
>>
>> you will find that on the Cake talking folder.
>> Could be any wrong or missing necessary windows parameter.
>> Also, of course, You can try to re-instal Cake talking.
>>
>> Anyway, regarding Cake talking and Sonar, forget Jaws 13 for now!
>>
>> best regards,
>> Rui Vilarinho
>>
>> ----- Original Message -----
>> From: "Stephen Giannaros" <stephen.giannaros@xxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Saturday, May 12, 2012 9:46 PM
>> Subject: [ddots-l] Re: technical question
>>
>>
>> I tried it with no luck. I downloaded both JAWS 10 and 11 (64 bit).
>> Both of these were demo copies from the FS website, and when I brought
>> Sonar up the console was totally different and weird. As soon as I
>> closed out of 10 or 11 and brought JAWS 13 back up the console changed
>> back to the track pane and was normal again.
>>
>> The reason why I downloaded these two versions from the FS site
>> instead of using my hardcopy of JAWS10 is because that copy is for a
>> 32 bit system and would not install on this system.
>> Any other thoughts?
>>
>>
>> On 5/12/12, Jack Conti <jackconti@xxxxxxx> wrote:
>>> Steve you sure can, using eleven here and
>>> problems went away. did a clean install of 11 then hsc and lastly ct.
>>> At 01:48 PM 5/12/2012, you wrote:
>>>>Yes, that sounds correct. Though, I did not know that until after I
>>>>got JAWS 13. I wonder since I already have JAWS 13, if I could
>>>>download JAWS 11 from FS, and use 11 when using CT/Sonar. Before I do
>>>>any of that just wondering if anyone else has anything else to say on
>>>>my issue.On 5/12/12, Omar Binno <omarbinno@xxxxxxxxx> wrote:
>>>> > from my understanding, there hasn't been an official statement saying
>>>> > that
>>>> > ct works well with jaws 13. Suppose to work best with jaws 11, if i'm
>>>> > remembering correctly.
>>>> > ----- Original Message -----
>>>> > From: "Stephen Giannaros" <stephen.giannaros@xxxxxxxxx>
>>>> > To: <ddots-l@xxxxxxxxxxxxx>
>>>> > Sent: Saturday, May 12, 2012 1:33 PM
>>>> > Subject: [ddots-l] technical question
>>>> >
>>>> >
>>>> > Hello all,
>>>> > I am having a little technical problem and want to see if someone can
>>>> > help me out.
>>>> > I recently got a new computer and finally got everything up and
>>>> > running. Last night I recorded some audio tracks, and some of the
>>>> > editing functions I normally use are not working for me. I will
>>>> > select a portion of a track, press delete(JAWS does not say “delete”
>>>> > like it usually would), it will not delete what I selected, but will
>>>> > delete much more than what I selected. Also, it allows me to copy a
>>>> > selected track, but will not paste for me.
>>>> > One adjustment I did make recently to Sonar is I raised the buffer
>>>> > size for both play back and record from 256 to 512 because when it
>>>> > was
>>>> > at 256 it was dropping out every two or three seconds whether I was
>>>> > recording or playing something back. Not sure if this buffer change
>>>> > has any effect on these editing tasks that I am having problems with.
>>>> > Also, with my new computer I got JAWS 13, so not sure if that is
>>>> > complicating things too?
>>>> > Anyone got any suggestions?
>>>> >
>>>> >
>>>> > Best,
>>>> >
>>>> >
>>>> >
>>>> > Steve.
>>>> > PLEASE READ THIS FOOTER AT LEAST ONCE!
>>>> > To leave the list, click on the immediately following link:
>>>> > ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
>>>> > If this link doesn't work then send a message to:
>>>> > ddots-l-request@xxxxxxxxxxxxx
>>>> > and in the Subject line type
>>>> > unsubscribe
>>>> > For other list commands such as vacation mode,
>>>> > click on the immediately following link:
>>>> > ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>>>> > send a message, to
>>>> > ddots-l-request@xxxxxxxxxxxxx
>>>> > and in the Subject line type
>>>> > faq
>>>> >
>>>> > PLEASE READ THIS FOOTER AT LEAST ONCE!
>>>> > To leave the list, click on the immediately following link:
>>>> > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>>> > If this link doesn't work then send a message to:
>>>> > ddots-l-request@xxxxxxxxxxxxx
>>>> > and in the Subject line type
>>>> > unsubscribe
>>>> > For other list commands such as vacation mode,
>>>> > click on the immediately following link:
>>>> > ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>>>> > send a message, to
>>>> > ddots-l-request@xxxxxxxxxxxxx
>>>> > and in the Subject line type
>>>> > faq
>>>> >
>>>> >
>>>>PLEASE READ THIS FOOTER AT LEAST ONCE!
>>>>To leave the list, click on the immediately following link:
>>>>ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
>>>>If this link doesn't work then send a message to:
>>>>ddots-l-request@xxxxxxxxxxxxx
>>>>and in the Subject line type
>>>>unsubscribe
>>>>For other list commands such as vacation mode,
>>>>click on the immediately following link:
>>>>ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>>>>send a message, to
>>>>ddots-l-request@xxxxxxxxxxxxx
>>>>and in the Subject line type
>>>>faq
>>>
>>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>>> To leave the list, click on the immediately following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
>>> If this link doesn't work then send a message to:
>>> ddots-l-request@xxxxxxxxxxxxx
>>> and in the Subject line type
>>> unsubscribe
>>> For other list commands such as vacation mode,
>>> click on the immediately following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>>> send a message, to
>>> ddots-l-request@xxxxxxxxxxxxx
>>> and in the Subject line type
>>> faq
>>>
>>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode,
>> click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>> send a message, to
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the immediately
>> following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>> send a message, to ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
