Okay, that all makes sense. Thank you so much. After I get JAWS 11 authorized I’ll just do a fresh install with everything and I’m sure that’ll take care of the issue. Thanks guys! Steve On 5/12/12, Chris Smart <csmart8@xxxxxxxxx> wrote: > agreed. If you didn't run an authorized copy of > those earlier versions, then obviously > CakeTalking, which is tied to your Jaws serial number, will not load. > > So try it again, but using an authorized Jaws 11, > reinstall CT if necessary, and I would bet you will have no problems. > > At 05:03 PM 5/12/2012, you wrote: >>Why are they demos if you have jaws 13? You >>should be able to download the >>full version of any previous jaws downgrade, and >>did you install the ct >>scripts in jaws 10/11? >> >> >>Omar Binno >> >>Website: www.bigoproductions.net >>-----Original Message----- >>From: ddots-l-bounce@xxxxxxxxxxxxx >>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On >>Behalf Of Stephen Giannaros >>Sent: Saturday, May 12, 2012 4:46 PM >>To: ddots-l@xxxxxxxxxxxxx >>Subject: [ddots-l] Re: technical question >> >>I tried it with no luck. I downloaded both JAWS 10 and 11 (64 bit). >>Both of these were demo copies from the FS >>website, and when I brought Sonar >>up the console was totally different and >>weird. As soon as I closed out of >>10 or 11 and brought JAWS 13 back up the console >>changed back to the track >>pane and was normal again. >> >>The reason why I downloaded these two versions >>from the FS site instead of >>using my hardcopy of JAWS10 is because that copy is for a >>32 bit system and would not install on this system. >>Any other thoughts? >> >> >>On 5/12/12, Jack Conti <jackconti@xxxxxxx> wrote: >> > Steve you sure can, using eleven here and >> problems went away. did a >> > clean install of 11 then hsc and lastly ct. >> > At 01:48 PM 5/12/2012, you wrote: >> >>Yes, that sounds correct. Though, I did not >> know that until after I >> >>got JAWS 13. I wonder since I already have JAWS 13, if I could >> >>download JAWS 11 from FS, and use 11 when >> using CT/Sonar. Before I do >> >>any of that just wondering if anyone else has >> anything else to say on >> >>my issue.On 5/12/12, Omar Binno <omarbinno@xxxxxxxxx> wrote: >> >> > from my understanding, there hasn't been an official statement >> >> > saying that ct works well with jaws 13. >> Suppose to work best with >> >> > jaws 11, if i'm remembering correctly. >> >> > ----- Original Message ----- >> >> > From: "Stephen Giannaros" <stephen.giannaros@xxxxxxxxx> >> >> > To: <ddots-l@xxxxxxxxxxxxx> >> >> > Sent: Saturday, May 12, 2012 1:33 PM >> >> > Subject: [ddots-l] technical question >> >> > >> >> > >> >> > Hello all, >> >> > I am having a little technical problem and >> want to see if someone >> >> > can help me out. >> >> > I recently got a new computer and finally got everything up and >> >> > running. Last night I recorded some audio >> tracks, and some of the >> >> > editing functions I normally use are not >> working for me. I will >> >> > select a portion of a track, press >> delete(JAWS does not say “delete” >> >> > like it usually would), it will not delete what I selected, but >> >> > will delete much more than what I >> selected. Also, it allows me to >> >> > copy a selected track, but will not paste for me. >> >> > One adjustment I did make recently to >> Sonar is I raised the buffer >> >> > size for both play back and record from >> 256 to 512 because when it >> >> > was at 256 it was dropping out every two >> or three seconds whether I >> >> > was recording or playing something >> back. Not sure if this buffer >> >> > change has any effect on these editing >> tasks that I am having problems >>with. >> >> > Also, with my new computer I got JAWS 13, >> so not sure if that is >> >> > complicating things too? >> >> > Anyone got any suggestions? >> >> > >> >> > >> >> > Best, >> >> > >> >> > >> >> > >> >> > Steve. >> >> > PLEASE READ THIS FOOTER AT LEAST ONCE! >> >> > To leave the list, click on the immediately following link: >> >> > ddots-l-request@xxxxxxxxxxxxx?subject=subscribe >> >> > If this link doesn't work then send a message to: >> >> > ddots-l-request@xxxxxxxxxxxxx >> >> > and in the Subject line type >> >> > unsubscribe >> >> > For other list commands such as vacation mode, click on the >> >> > immediately following link: >> >> > ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to >> >> > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq >> >> > >> >> > PLEASE READ THIS FOOTER AT LEAST ONCE! >> >> > To leave the list, click on the immediately following link: >> >> > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >> >> > If this link doesn't work then send a message to: >> >> > ddots-l-request@xxxxxxxxxxxxx >> >> > and in the Subject line type >> >> > unsubscribe >> >> > For other list commands such as vacation mode, click on the >> >> > immediately following link: >> >> > ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to >> >> > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq >> >> > >> >> > >> >>PLEASE READ THIS FOOTER AT LEAST ONCE! >> >>To leave the list, click on the immediately following link: >> >>ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe >> >>If this link doesn't work then send a message to: >> >>ddots-l-request@xxxxxxxxxxxxx >> >>and in the Subject line type >> >>unsubscribe >> >>For other list commands such as vacation mode, click on the >> >>immediately following link: >> >>ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to >> >>ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq >> > >> > PLEASE READ THIS FOOTER AT LEAST ONCE! >> > To leave the list, click on the immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe >> > If this link doesn't work then send a message to: >> > ddots-l-request@xxxxxxxxxxxxx >> > and in the Subject line type >> > unsubscribe >> > For other list commands such as vacation mode, click on the >> > immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to >> > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq >> > >> > >>PLEASE READ THIS FOOTER AT LEAST ONCE! >>To leave the list, click on the immediately following link: >>ddots-l-request@xxxxxxxxxxxxx?subject=subscribe >>If this link doesn't work then send a message to: >>ddots-l-request@xxxxxxxxxxxxx >>and in the Subject line type >>unsubscribe >>For other list commands such as vacation mode, >>click on the immediately >>following link: >>ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to >>ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq >> >>PLEASE READ THIS FOOTER AT LEAST ONCE! >>To leave the list, click on the immediately following link: >>ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe >>If this link doesn't work then send a message to: >>ddots-l-request@xxxxxxxxxxxxx >>and in the Subject line type >>unsubscribe >>For other list commands such as vacation mode, >>click on the immediately following link: >>ddots-l-request@xxxxxxxxxxxxx?subjectúq or >>send a message, to >>ddots-l-request@xxxxxxxxxxxxx >>and in the Subject line type >>faq > > -------------------------------------------------- > CTS MASTERING: http://www.ctsmastering.com > Twitter: https://twitter.com/#!/CTSMASTERING > Facebook: https://www.facebook.com/pages/CTS-Mastering/139114066128698 > Linked In: http://ca.linkedin.com/pub/chris-smart/46/824/536 > Dropbox: Have your stuff when you need it. 2GB is > free: http://db.tt/bQ2GuIt > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, > click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subjectúq or > send a message, to > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq