did you install CT for each of those Jaws versions you tried? At 04:46 PM 5/12/2012, you wrote:
I tried it with no luck. I downloaded both JAWS 10 and 11 (64 bit). Both of these were demo copies from the FS website, and when I brought Sonar up the console was totally different and weird. As soon as I closed out of 10 or 11 and brought JAWS 13 back up the console changed back to the track pane and was normal again. The reason why I downloaded these two versions from the FS site instead of using my hardcopy of JAWS10 is because that copy is for a 32 bit system and would not install on this system. Any other thoughts? On 5/12/12, Jack Conti <jackconti@xxxxxxx> wrote: > Steve you sure can, using eleven here and> problems went away. did a clean install of 11 then hsc and lastly ct.> At 01:48 PM 5/12/2012, you wrote:>>Yes, that sounds correct. Though, I did not know that until after I>>got JAWS 13. I wonder since I already have JAWS 13, if I could>>download JAWS 11 from FS, and use 11 when using CT/Sonar. Before I do >>any of that just wondering if anyone else has anything else to say on>>my issue.On 5/12/12, Omar Binno <omarbinno@xxxxxxxxx> wrote:>> > from my understanding, there hasn't been an official statement saying>> > that>> > ct works well with jaws 13. Suppose to work best with jaws 11, if i'm>> > remembering correctly. >> > ----- Original Message ----- >> > From: "Stephen Giannaros" <stephen.giannaros@xxxxxxxxx> >> > To: <ddots-l@xxxxxxxxxxxxx> >> > Sent: Saturday, May 12, 2012 1:33 PM >> > Subject: [ddots-l] technical question >> > >> > >> > Hello all,>> > I am having a little technical problem and want to see if someone can>> > help me out. >> > I recently got a new computer and finally got everything up and>> > running. Last night I recorded some audio tracks, and some of the>> > editing functions I normally use are not working for me. I will>> > select a portion of a track, press delete(JAWS does not say ?delete? >> > like it usually would), it will not delete what I selected, but will >> > delete much more than what I selected. Also, it allows me to copy a>> > selected track, but will not paste for me.>> > One adjustment I did make recently to Sonar is I raised the buffer >> > size for both play back and record from 256 to 512 because when it was >> > at 256 it was dropping out every two or three seconds whether I was >> > recording or playing something back. Not sure if this buffer change >> > has any effect on these editing tasks that I am having problems with.>> > Also, with my new computer I got JAWS 13, so not sure if that is >> > complicating things too? >> > Anyone got any suggestions? >> > >> > >> > Best, >> > >> > >> > >> > Steve. >> > PLEASE READ THIS FOOTER AT LEAST ONCE! >> > To leave the list, click on the immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subject=subscribe >> > If this link doesn't work then send a message to: >> > ddots-l-request@xxxxxxxxxxxxx >> > and in the Subject line type >> > unsubscribe >> > For other list commands such as vacation mode, >> > click on the immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subjectúq or >> > send a message, to >> > ddots-l-request@xxxxxxxxxxxxx >> > and in the Subject line type >> > faq >> > >> > PLEASE READ THIS FOOTER AT LEAST ONCE! >> > To leave the list, click on the immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >> > If this link doesn't work then send a message to: >> > ddots-l-request@xxxxxxxxxxxxx >> > and in the Subject line type >> > unsubscribe >> > For other list commands such as vacation mode, >> > click on the immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subject=faq or >> > send a message, to >> > ddots-l-request@xxxxxxxxxxxxx >> > and in the Subject line type >> > faq >> > >> > >>PLEASE READ THIS FOOTER AT LEAST ONCE! >>To leave the list, click on the immediately following link: >>ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe >>If this link doesn't work then send a message to: >>ddots-l-request@xxxxxxxxxxxxx >>and in the Subject line type >>unsubscribe >>For other list commands such as vacation mode, >>click on the immediately following link: >>ddots-l-request@xxxxxxxxxxxxx?subjectúq or >>send a message, to >>ddots-l-request@xxxxxxxxxxxxx >>and in the Subject line type >>faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, > click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subjectúq or > send a message, to > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
-------------------------------------------------- CTS MASTERING: http://www.ctsmastering.com Twitter: https://twitter.com/#!/CTSMASTERING Facebook: https://www.facebook.com/pages/CTS-Mastering/139114066128698 Linked In: http://ca.linkedin.com/pub/chris-smart/46/824/536Dropbox: Have your stuff when you need it. 2GB is free: http://db.tt/bQ2GuIt
PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq