absolutely chris!!! At 06:20 PM 5/12/2012, you wrote:
agreed. If you didn't run an authorized copy of those earlier versions, then obviously CakeTalking, which is tied to your Jaws serial number, will not load.So try it again, but using an authorized Jaws 11, reinstall CT if necessary, and I would bet you will have no problems.At 05:03 PM 5/12/2012, you wrote:Why are they demos if you have jaws 13? You should be able to download the full version of any previous jaws downgrade, and did you install the ct scripts in jaws 10/11? Omar Binno Website: www.bigoproductions.net -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Stephen Giannaros Sent: Saturday, May 12, 2012 4:46 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: technical question I tried it with no luck. I downloaded both JAWS 10 and 11 (64 bit). Both of these were demo copies from the FS website, and when I brought Sonar up the console was totally different and weird. As soon as I closed out of 10 or 11 and brought JAWS 13 back up the console changed back to the track pane and was normal again. The reason why I downloaded these two versions from the FS site instead of using my hardcopy of JAWS10 is because that copy is for a 32 bit system and would not install on this system. Any other thoughts? On 5/12/12, Jack Conti <jackconti@xxxxxxx> wrote: > Steve you sure can, using eleven here and problems went away. did a > clean install of 11 then hsc and lastly ct. > At 01:48 PM 5/12/2012, you wrote: >>Yes, that sounds correct. Though, I did not know that until after I >>got JAWS 13. I wonder since I already have JAWS 13, if I could >>download JAWS 11 from FS, and use 11 when using CT/Sonar. Before I do >>any of that just wondering if anyone else has anything else to say on >>my issue.On 5/12/12, Omar Binno <omarbinno@xxxxxxxxx> wrote: >> > from my understanding, there hasn't been an official statement >> > saying that ct works well with jaws 13. Suppose to work best with >> > jaws 11, if i'm remembering correctly. >> > ----- Original Message ----- >> > From: "Stephen Giannaros" <stephen.giannaros@xxxxxxxxx> >> > To: <ddots-l@xxxxxxxxxxxxx> >> > Sent: Saturday, May 12, 2012 1:33 PM >> > Subject: [ddots-l] technical question >> > >> > >> > Hello all, >> > I am having a little technical problem and want to see if someone >> > can help me out. >> > I recently got a new computer and finally got everything up and >> > running. Last night I recorded some audio tracks, and some of the >> > editing functions I normally use are not working for me. I will >> > select a portion of a track, press delete(JAWS does not say ?delete? >> > like it usually would), it will not delete what I selected, but >> > will delete much more than what I selected. Also, it allows me to >> > copy a selected track, but will not paste for me. >> > One adjustment I did make recently to Sonar is I raised the buffer >> > size for both play back and record from 256 to 512 because when it >> > was at 256 it was dropping out every two or three seconds whether I >> > was recording or playing something back. Not sure if this buffer >> > change has any effect on these editing tasks that I am having problems with. >> > Also, with my new computer I got JAWS 13, so not sure if that is >> > complicating things too? >> > Anyone got any suggestions? >> > >> > >> > Best, >> > >> > >> > >> > Steve. >> > PLEASE READ THIS FOOTER AT LEAST ONCE! >> > To leave the list, click on the immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subject=subscribe >> > If this link doesn't work then send a message to: >> > ddots-l-request@xxxxxxxxxxxxx >> > and in the Subject line type >> > unsubscribe >> > For other list commands such as vacation mode, click on the >> > immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to >> > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq >> > >> > PLEASE READ THIS FOOTER AT LEAST ONCE! >> > To leave the list, click on the immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >> > If this link doesn't work then send a message to: >> > ddots-l-request@xxxxxxxxxxxxx >> > and in the Subject line type >> > unsubscribe >> > For other list commands such as vacation mode, click on the >> > immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to >> > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq >> > >> > >>PLEASE READ THIS FOOTER AT LEAST ONCE! >>To leave the list, click on the immediately following link: >>ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe >>If this link doesn't work then send a message to: >>ddots-l-request@xxxxxxxxxxxxx >>and in the Subject line type >>unsubscribe >>For other list commands such as vacation mode, click on the >>immediately following link: >>ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to >>ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, click on the > immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq-------------------------------------------------- CTS MASTERING: http://www.ctsmastering.com Twitter: https://twitter.com/#!/CTSMASTERING Facebook: https://www.facebook.com/pages/CTS-Mastering/139114066128698 Linked In: http://ca.linkedin.com/pub/chris-smart/46/824/536 Dropbox: Have your stuff when you need it. 2GB is free: http://db.tt/bQ2GuIt PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribeFor other list commands such as vacation mode, click on the immediately following link:ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq