[ddots-l] Re: technical question
- From: Stephen Giannaros <stephen.giannaros@xxxxxxxxx>
- To: ddots-l@xxxxxxxxxxxxx
- Date: Sat, 12 May 2012 17:58:35 -0400
I did not know that I could download the full version. I think though
I'm going to uninstall and start fresh and retrace my steps. Thanks
for the tips!
Steve
On 5/12/12, Rui Vilarinho <ruialby@xxxxxxxxxxx> wrote:
> Strange !
> Well, check the step by step windows version recommended configurations,
> you will find that on the Cake talking folder.
> Could be any wrong or missing necessary windows parameter.
> Also, of course, You can try to re-instal Cake talking.
>
> Anyway, regarding Cake talking and Sonar, forget Jaws 13 for now!
>
> best regards,
> Rui Vilarinho
>
> ----- Original Message -----
> From: "Stephen Giannaros" <stephen.giannaros@xxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Saturday, May 12, 2012 9:46 PM
> Subject: [ddots-l] Re: technical question
>
>
> I tried it with no luck. I downloaded both JAWS 10 and 11 (64 bit).
> Both of these were demo copies from the FS website, and when I brought
> Sonar up the console was totally different and weird. As soon as I
> closed out of 10 or 11 and brought JAWS 13 back up the console changed
> back to the track pane and was normal again.
>
> The reason why I downloaded these two versions from the FS site
> instead of using my hardcopy of JAWS10 is because that copy is for a
> 32 bit system and would not install on this system.
> Any other thoughts?
>
>
> On 5/12/12, Jack Conti <jackconti@xxxxxxx> wrote:
>> Steve you sure can, using eleven here and
>> problems went away. did a clean install of 11 then hsc and lastly ct.
>> At 01:48 PM 5/12/2012, you wrote:
>>>Yes, that sounds correct. Though, I did not know that until after I
>>>got JAWS 13. I wonder since I already have JAWS 13, if I could
>>>download JAWS 11 from FS, and use 11 when using CT/Sonar. Before I do
>>>any of that just wondering if anyone else has anything else to say on
>>>my issue.On 5/12/12, Omar Binno <omarbinno@xxxxxxxxx> wrote:
>>> > from my understanding, there hasn't been an official statement saying
>>> > that
>>> > ct works well with jaws 13. Suppose to work best with jaws 11, if i'm
>>> > remembering correctly.
>>> > ----- Original Message -----
>>> > From: "Stephen Giannaros" <stephen.giannaros@xxxxxxxxx>
>>> > To: <ddots-l@xxxxxxxxxxxxx>
>>> > Sent: Saturday, May 12, 2012 1:33 PM
>>> > Subject: [ddots-l] technical question
>>> >
>>> >
>>> > Hello all,
>>> > I am having a little technical problem and want to see if someone can
>>> > help me out.
>>> > I recently got a new computer and finally got everything up and
>>> > running. Last night I recorded some audio tracks, and some of the
>>> > editing functions I normally use are not working for me. I will
>>> > select a portion of a track, press delete(JAWS does not say “delete”
>>> > like it usually would), it will not delete what I selected, but will
>>> > delete much more than what I selected. Also, it allows me to copy a
>>> > selected track, but will not paste for me.
>>> > One adjustment I did make recently to Sonar is I raised the buffer
>>> > size for both play back and record from 256 to 512 because when it was
>>> > at 256 it was dropping out every two or three seconds whether I was
>>> > recording or playing something back. Not sure if this buffer change
>>> > has any effect on these editing tasks that I am having problems with.
>>> > Also, with my new computer I got JAWS 13, so not sure if that is
>>> > complicating things too?
>>> > Anyone got any suggestions?
>>> >
>>> >
>>> > Best,
>>> >
>>> >
>>> >
>>> > Steve.
>>> > PLEASE READ THIS FOOTER AT LEAST ONCE!
>>> > To leave the list, click on the immediately following link:
>>> > ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
>>> > If this link doesn't work then send a message to:
>>> > ddots-l-request@xxxxxxxxxxxxx
>>> > and in the Subject line type
>>> > unsubscribe
>>> > For other list commands such as vacation mode,
>>> > click on the immediately following link:
>>> > ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>>> > send a message, to
>>> > ddots-l-request@xxxxxxxxxxxxx
>>> > and in the Subject line type
>>> > faq
>>> >
>>> > PLEASE READ THIS FOOTER AT LEAST ONCE!
>>> > To leave the list, click on the immediately following link:
>>> > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>> > If this link doesn't work then send a message to:
>>> > ddots-l-request@xxxxxxxxxxxxx
>>> > and in the Subject line type
>>> > unsubscribe
>>> > For other list commands such as vacation mode,
>>> > click on the immediately following link:
>>> > ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>>> > send a message, to
>>> > ddots-l-request@xxxxxxxxxxxxx
>>> > and in the Subject line type
>>> > faq
>>> >
>>> >
>>>PLEASE READ THIS FOOTER AT LEAST ONCE!
>>>To leave the list, click on the immediately following link:
>>>ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
>>>If this link doesn't work then send a message to:
>>>ddots-l-request@xxxxxxxxxxxxx
>>>and in the Subject line type
>>>unsubscribe
>>>For other list commands such as vacation mode,
>>>click on the immediately following link:
>>>ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>>>send a message, to
>>>ddots-l-request@xxxxxxxxxxxxx
>>>and in the Subject line type
>>>faq
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode,
>> click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>> send a message, to
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
