Thank you, Bill, that was indeed what I did not have in my instructions. Now the TranzPort is there. However, my Jaws 7.1 prompts as unauthorized, and, unfortunately, I send my authorization key without success. In adition, when I return to the pc keyboard and use the arrow keys, CT5 tells me that i'm using an unauthorized version of CT. For today I've lost my humor to work on that. Maybe, when I come back tomorrow, there's some good advice?
Wolfgang----- Original Message ----- From: "William R. McCann" <BillList1@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx> Sent: Thursday, January 04, 2007 3:22 PM Subject: [ddots-l] Re: Configuring TranzPort
Dear Wolfgang, Perhaps you received an incorrect version of our instructions. I'll pastein the revised section below. Our original instructions did not include theimportant information in section 1.2. ... Configuring TranzPort 1.1. Run SONAR and choose Options | MIDI (ALT+O, M). Check the TranzPort entry in both the input and output list. 1.2. Now choose Options | Control Surface (ALT+O, C). Tab to the "Add a Control Surface" button and press ENTER. If Frontier TranzPort is not thehighlighted entry in your list, arrow down to select the Frontier TranzPort entry. Now tab and make sure that the TranzPort is highlighted in both theinput and output list. Press OK to add the TranzPort and then the Close button of the Control Surfaces dialog. 2. Following applies only to customers who have successfully installed CakeTalking for SONAR 5: Press F6 to refresh the screen. Press F4 to open the Track Pane Options. Choose option 1: Open a list of Control Surfaces so You can choose one to use. After pressing ENTER, Choose your TranzPort Control Surface from the list, Then press ENTER to Return to the Track Pane. 3. Press F4 to open the Track Pane Options. Choose option 2: Make JAWS Speak Changes You Make On Your External ControlSurface. After Pressing Enter, This Setting Will Be Enabled. But It Will BeDisabled Whenever you return to using your PC keyboard. -----Original Message-----From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] OnBehalf Of Wolfgang Angermann Sent: Thursday, January 04, 2007 8:26 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Configuring TranzPort Hello: although I have successfully performed the TranzPort installation from theDD instructions, and although I performed the steps to confugure it, I don'tfind the TranzPort listed in the control surfaces of my track options. In that list there are just the 4 Sonar Jaws surfaces. I've successfully installed sonar 5 and CT5. TranzPort is also selected among the midi inputs and outputs. I'd be happy about any help. Thank You! Wolfgang ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq