[ddots-l] Re: Configuring TranzPort
- From: "William R. McCann" <BillList1@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 4 Jan 2007 09:22:11 -0500
Dear Wolfgang,
Perhaps you received an incorrect version of our instructions. I'll paste
in the revised section below. Our original instructions did not include the
important information in section 1.2.
...
Configuring TranzPort
1.1. Run SONAR and choose Options | MIDI (ALT+O, M). Check the TranzPort
entry in both the input and output list.
1.2. Now choose Options | Control Surface (ALT+O, C). Tab to the "Add a
Control Surface" button and press ENTER. If Frontier TranzPort is not the
highlighted entry in your list, arrow down to select the Frontier TranzPort
entry. Now tab and make sure that the TranzPort is highlighted in both the
input and output list. Press OK to add the TranzPort and then the Close
button of the Control Surfaces dialog.
2. Following applies only to customers who have successfully installed
CakeTalking for SONAR 5:
Press F6 to refresh the screen.
Press F4 to open the Track Pane Options.
Choose option 1: Open a list of Control Surfaces so You can choose one to
use. After pressing ENTER, Choose your TranzPort Control Surface from the
list, Then press ENTER to Return to the Track Pane.
3. Press F4 to open the Track Pane Options.
Choose option 2: Make JAWS Speak Changes You Make On Your External Control
Surface. After Pressing Enter, This Setting Will Be Enabled. But It Will Be
Disabled Whenever you return to using your PC keyboard.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Wolfgang Angermann
Sent: Thursday, January 04, 2007 8:26 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Configuring TranzPort
Hello:
although I have successfully performed the TranzPort installation from the
DD instructions, and although I performed the steps to confugure it, I don't
find the TranzPort listed in the control surfaces of my track options. In
that list there are just the 4 Sonar Jaws surfaces.
I've successfully installed sonar 5 and CT5. TranzPort is also selected
among the midi inputs and outputs.
I'd be happy about any help. Thank You!
Wolfgang
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
