Hi:
If you install the Tranzport then jaws does the problem happen? I am just
reformating my computer and am purchasing a tranzport!
Sean.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of William R. McCann
Sent: 04 January 2007 23:06
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Configuring TranzPort
OK, Wolfgang, the only thing you can do is reboot your machine or unload
and
restart JAWS. Either way, JAWS will ask you to activate your unit of
JAWS.
For some reason, JAWS decides that your copy is not activated after you
install a device like the TranzPort. The people at Freedom Scientific are
aware of this problem but have not yet released a solution for it.
Best,
Bill
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of Wolfgang Angermann
Sent: Thursday, January 04, 2007 1:54 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Configuring TranzPort
Thank you, Bill, that was indeed what I did not have in my instructions.
Now
the TranzPort is there. However, my Jaws 7.1 prompts as unauthorized, and,
unfortunately, I send my authorization key without success. In adition,
when
I return to the pc keyboard and use the arrow keys, CT5 tells me that i'm
using an unauthorized version of CT. For today I've lost my humor to work
on
that. Maybe, when I come back tomorrow, there's some good advice?
Wolfgang
----- Original Message -----
From: "William R. McCann" <BillList1@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, January 04, 2007 3:22 PM
Subject: [ddots-l] Re: Configuring TranzPort
Dear Wolfgang,
Perhaps you received an incorrect version of our instructions. I'll
paste
in the revised section below. Our original instructions did not include
the
important information in section 1.2.
...
Configuring TranzPort
1.1. Run SONAR and choose Options | MIDI (ALT+O, M). Check the
TranzPort
entry in both the input and output list.
1.2. Now choose Options | Control Surface (ALT+O, C). Tab to the "Add a
Control Surface" button and press ENTER. If Frontier TranzPort is not
the
highlighted entry in your list, arrow down to select the Frontier
TranzPort
entry. Now tab and make sure that the TranzPort is highlighted in both
the
input and output list. Press OK to add the TranzPort and then the Close
button of the Control Surfaces dialog.
2. Following applies only to customers who have successfully installed
CakeTalking for SONAR 5:
Press F6 to refresh the screen.
Press F4 to open the Track Pane Options.
Choose option 1: Open a list of Control Surfaces so You can choose one to
use. After pressing ENTER, Choose your TranzPort Control Surface from the
list, Then press ENTER to Return to the Track Pane.
3. Press F4 to open the Track Pane Options.
Choose option 2: Make JAWS Speak Changes You Make On Your External
Control
Surface. After Pressing Enter, This Setting Will Be Enabled. But It Will
Be
Disabled Whenever you return to using your PC keyboard.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of Wolfgang Angermann
Sent: Thursday, January 04, 2007 8:26 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Configuring TranzPort
Hello:
although I have successfully performed the TranzPort installation from
the
DD instructions, and although I performed the steps to confugure it, I
don't
find the TranzPort listed in the control surfaces of my track options. In
that list there are just the 4 Sonar Jaws surfaces.
I've successfully installed sonar 5 and CT5. TranzPort is also selected
among the midi inputs and outputs.
I'd be happy about any help. Thank You!
Wolfgang
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
