[ddots-l] Re: Configuring TranzPort
- From: "James Malone" <malone_j@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Fri, 5 Jan 2007 08:11:27 -0800
Hi Gord,
I did it on line once with no problems, but can see where confusion could
happen. SF wants to know what the reason is for wanting to reset your code.
James
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Gordon Kent
Sent: Friday, January 05, 2007 7:20 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Configuring TranzPort
Hello:
You're better off just calling them for an activation code.
Gord
----- Original Message -----
From: "James Malone" <malone_j@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, January 04, 2007 7:52 PM
Subject: [ddots-l] Re: Configuring TranzPort
> Sorry about that.
> It looks like Activate was the wrong page, so go to Freedom Scientifics
> site
> and follow the links to the Activate page under support.
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of James Malone
> Sent: Thursday, January 04, 2007 4:47 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Configuring TranzPort
>
> Just as long as you let SF know about the problem, They will reset your
> count.
> Go to http://www.activate.com.
> Fill out the form, you will be notified within 24 hours.
> James
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of William R. McCann
> Sent: Thursday, January 04, 2007 3:06 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Configuring TranzPort
>
> OK, Wolfgang, the only thing you can do is reboot your machine or unload
> and
> restart JAWS. Either way, JAWS will ask you to activate your unit of
> JAWS.
> For some reason, JAWS decides that your copy is not activated after you
> install a device like the TranzPort. The people at Freedom Scientific are
> aware of this problem but have not yet released a solution for it.
>
> Best,
> Bill
>
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Wolfgang Angermann
> Sent: Thursday, January 04, 2007 1:54 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Configuring TranzPort
>
> Thank you, Bill, that was indeed what I did not have in my instructions.
> Now
>
> the TranzPort is there. However, my Jaws 7.1 prompts as unauthorized, and,
> unfortunately, I send my authorization key without success. In adition,
> when
>
> I return to the pc keyboard and use the arrow keys, CT5 tells me that i'm
> using an unauthorized version of CT. For today I've lost my humor to work
> on
>
> that. Maybe, when I come back tomorrow, there's some good advice?
>
> Wolfgang
> ----- Original Message -----
> From: "William R. McCann" <BillList1@xxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Thursday, January 04, 2007 3:22 PM
> Subject: [ddots-l] Re: Configuring TranzPort
>
>
>> Dear Wolfgang,
>>
>> Perhaps you received an incorrect version of our instructions. I'll
>> paste in the revised section below. Our original instructions did not
>> include the important information in section 1.2.
>>
>> ...
>>
>> Configuring TranzPort
>>
>> 1.1. Run SONAR and choose Options | MIDI (ALT+O, M). Check the
>> TranzPort entry in both the input and output list.
>>
>> 1.2. Now choose Options | Control Surface (ALT+O, C). Tab to the
>> "Add a Control Surface" button and press ENTER. If Frontier TranzPort
>> is not the highlighted entry in your list, arrow down to select the
>> Frontier TranzPort entry. Now tab and make sure that the TranzPort is
>> highlighted in both the input and output list. Press OK to add the
>> TranzPort and then the Close button of the Control Surfaces dialog.
>>
>> 2. Following applies only to customers who have successfully
>> installed CakeTalking for SONAR 5:
>> Press F6 to refresh the screen.
>> Press F4 to open the Track Pane Options.
>> Choose option 1: Open a list of Control Surfaces so You can choose one
>> to use. After pressing ENTER, Choose your TranzPort Control Surface
>> from the list, Then press ENTER to Return to the Track Pane.
>>
>> 3. Press F4 to open the Track Pane Options.
>> Choose option 2: Make JAWS Speak Changes You Make On Your External
>> Control Surface. After Pressing Enter, This Setting Will Be Enabled.
>> But It Will Be Disabled Whenever you return to using your PC keyboard.
>>
>>
>> -----Original Message-----
>> From: ddots-l-bounce@xxxxxxxxxxxxx
>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
>> On
>> Behalf Of Wolfgang Angermann
>> Sent: Thursday, January 04, 2007 8:26 AM
>> To: ddots-l@xxxxxxxxxxxxx
>> Subject: [ddots-l] Configuring TranzPort
>>
>> Hello:
>> although I have successfully performed the TranzPort installation from
>> the DD instructions, and although I performed the steps to confugure
>> it, I don't
>>
>> find the TranzPort listed in the control surfaces of my track options.
>> In that list there are just the 4 Sonar Jaws surfaces.
>>
>> I've successfully installed sonar 5 and CT5. TranzPort is also
>> selected among the midi inputs and outputs.
>>
>> I'd be happy about any help. Thank You!
>>
>> Wolfgang
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
