Hello Graeme, there seems to be a problem with the CIE_C illuminat support. In "spec2cie" I get the error message "Creation of spectral conversion object failed". With the file CIE_C.sp "spec2cie" works fine. Regards, Tobi Graeme Gill schrieb: > > I've attempted to address most of the issues raised by the V1.1.0 RC1 > release with an RC2 release. If no-one finds any serious problems > with it, I'll promote it to the formal V1.1.0 release in due course. > > Sources: <http://www.argyllcms.com/Argyll_V1.1.0_RC2_src.zip> > > Executables: > MSWindows: > <http://www.argyllcms.com/Argyll_V1.1.0_RC2_win32_exe.zip> > OS X PPC 10.3+: > <http://www.argyllcms.com/Argyll_V1.1.0_RC2_osx10.3_ppc_bin.tgz> > OS X Intel 10.4+ > <http://www.argyllcms.com/Argyll_V1.1.0_RC2_osx10.4_i86_bin.tgz> > Linux Intel 32 bit > <http://www.argyllcms.com/Argyll_V1.1.0_RC2_linux_x86_bin.tgz> > Linux Intel 64 bit > <http://www.argyllcms.com/Argyll_V1.1.0_RC2_linux_x86_64_bin.tgz> > > Summary of changes from V1.1.0 RC1: > > * Re-worked gamut mapping to improve saturation levels within the bulk > of the gamut, > as well as improve hue preservation. The overall "look" should be > closer to > that of V1.0.4, while retaining more detail. (It's a bit faster too!) > > * Added CIE C type illuminant spectrum support. > > * Modified DTP20 driver to double check for an offline read chart in > case it > is running old firmware. > > * Added device power value for targen to allow calibrating devices > that have > extreme non linearity. > > * Fixed bug in targen when full spread patches were mixed with other > test patch types. > > * Updated yajl library to latest version. > > * Improved X11 XRandR CRTC detection > > * Added verbosity level to profcheck to match invprofcheck. > > * Clarified licensing of various files (GPLv2+ files, reference files > and documentation). > > Graeme Gill. > > > > >