Any Screenprinting supplier (I use Lamberts out of Boston) that carries Sprayway Mist type #82 Says right on the front of the can...A Textile Screen Printing Adhesive Ideal for T-Shirt Fabrics Pressure Sensitive, Repositionable, Will Not Transfer To Fabric. Been using it for years...got 2 cases (12 cans each) for $110 + $19 freight a month or so ago. Do NOT use Aeroflex spray-some suppliers offer that as a 'substitute'...won't hold up even a fraction as long. When I'm screenprinting, one spray coat of Sprayway on the pallet will hold up to 36 shirts or more...Aero wouldn't last THREE shirts! Went through an entire can on an order of 100 shirts...finished the order with Sprayway instead, and have done over 400 shirts since and still on the same can! On the backing or hoop rims, just a quick 'mist' is all it takes-then let it sit and dry for a couple of minutes...longer it sits, longer it lasts! NEVER dries completely...always tacky. Shake it good.... Roland From: Jstgrma@xxxxxxx Reply-To: amayausers@xxxxxxxxxxxxx Date: Wed, 14 Sep 2005 09:49:26 EDT To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Hooping Where do you get the "pallet spray"? Sounds like it would be better than what I'm using. Thanks, Karen Embroidery Plus