Lisa, If the stock designs that you are buying require frequent editing, a wireframe format like CND is easier and quicker to change. Janel Harris Dimensional Designs http://www.dimdesigns.com Contract Digitizer Melco On-Site Trainer -----Original Message----- From: Wolf Embroidery [mailto:Wolfemb@xxxxxxxx] Sent: Monday, May 10, 2004 3:53 AM To: amayausers@xxxxxxxxxxxxxxxx; Rod & Sharon Subject: Re: [amayausers] Design Shop Question Janel Harris was able to fix the problem last night, but thank you for offering. I was also supplied with some literature to follow up with as I'm sure I will run into the problem again. The design was for a T-shirt and I suspect that was the problem as I have put the design on a hat with no issue. Can you recommend a file for Amaya use? Dakota has CND and TAJ, is there a significant difference? I have heard that Lisa A Ridley Wolf Embroidery Wolfemb@xxxxxxxx ----- Original Message ----- From: "Rod & Sharon" <springer37@xxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxxxxx> Sent: Monday, May 10, 2004 2:55 AM Subject: Re: [amayausers] Design Shop Question > Lisa, > If you would care to send me the design file , I would be happy to take a > look at it for you. I'm sure that it is a simple fix. > > What are you sewing it on? ie---what type of material? It sounds like a pull > comp problem to start with, but if not, some mild tweaking should fix the > problem.... > > Rod Springer > Melco field Tech > Boise Id > > ----- Original Message ----- > From: "Wolf Embroidery" <Wolfemb@xxxxxxxx> > To: <amayausers@xxxxxxxxxxxxxxxx> > Sent: Sunday, May 09, 2004 2:00 PM > Subject: Re: [amayausers] Design Shop Question > > > > That's what I thought, but no luck. I reduced the basketball by 1% in > hopes > > that the outline would cover the area but that did not work either. It > > looks great on the PC but when I stitch it out it's off. I guess I will > > send it to a digitizer for adjustment. > > > > Thanks for trying to help. > > > > Lisa A Ridley > > Wolf Embroidery > > Wolfemb@xxxxxxxx > > ----- Original Message ----- > > From: "Linen Barn" <linen@xxxxxxxxxxx> > > To: <amayausers@xxxxxxxxxxxxxxxx> > > Sent: Sunday, May 09, 2004 2:18 PM > > Subject: Re: [amayausers] Design Shop Question > > > > > > > Lisa, > > > > > > Just click on the outline to select it and it will show its points. > Move > > > the points out to where you want them. The worst part is that there are > > > going to be lots of point and they will be double if it is a walk stitch > > for > > > the outling. It might actually be easier to move the fill of the > > basketball > > > in. > > > > > > Aaron Sargent > > > The Linen Barn > > > linen@xxxxxxxxxxx > > > Medford, Oregon > > > ----- Original Message ----- > > > From: "Wolf Embroidery" <Wolfemb@xxxxxxxx> > > > To: <amayausers@xxxxxxxxxxxxxxxx> > > > Sent: Sunday, May 09, 2004 9:57 AM > > > Subject: [amayausers] Design Shop Question > > > > > > > > > I'm trying to edit a dakota design. The basketball I'm using is not > > > stitching correctly, the outline is stitching inside the orange part of > > the > > > ball. I know there is a way to move the outline out, but can't remember > > how > > > and for the life of me can't find the instructions in the manual. Can > > > anyone help? > > > > > > Lisa A Ridley > > > Wolf Embroidery > > > Wolfemb@xxxxxxxx > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > > > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > --------------------------------------------------------------------- To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx --------------------------------------------------------------------- To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx