Hi Tim, No, i haven't tried using ksstudio to instantiate my driver. To be frank, i am not aware of this. What exactly will happen when i instantiate driver with ksstudio and how to do that ( if possible just give me some reference link or document ) ? Thanks. On Wed, Jan 29, 2014 at 6:18 AM, Tim Roberts <timr@xxxxxxxxx> wrote: > Gaurav Khuntale wrote: > > > > > > I am working on a audio driver which is based on wavecyclic. My driver > > is failing Wave test with following errors, > > > > 1) FAIL : Data Intersection Test\Render Streaming\Check Supported Formats > > CKsPin::Instantiate. Failed to instantiate KSPIN_DATAFLOW_IN pin! > > KsCreatePin returned = 0x00000001 > > [ GetLastError() returned 1 (0x1) - Incorrect function. ]. > > FAIL: KSPROPERTY_PIN_DATAINTERSECTION Succeeded, Pin Creation > > Failed. > > > > 2) Compliance Tests\UAA-Compliance Test > > 1.FAIL: The Device driver is not one of the UAA Compliant types > > (HDAudio,USB Audio 1.0, USB Audio 2.0, Bluetooth)! > > > > Regarding first failure, i tried to search about that but failed to > > understand what exactly Failure is and reason behind the failure. My > > primary understanding says, this failure is because my driver is not > > supporting KSPROPERTY_PIN_DATAINTERSECTION property. Is this right ? > > Can anyone please help me here ? > > No. Read the error: KSPROPERTY_PIN_DATAINTERSECTION succeeded. Pin > creation failed. You're going to need to put some debug prints into > your driver to chase down which function is failing. Have you tried > using ksstudio to instantiate your driver? Does it work in graphedt? > > > > Regarding second failure, as my driver is virtual driver, how can i > > pass this failure ? Should my driver must be from one of the category > > listed in failure ? > > You can't WHQL a virtual audio driver. > > -- > Tim Roberts, timr@xxxxxxxxx > Providenza & Boekelheide, Inc. > > ****************** > > WDMAUDIODEV addresses: > Post message: mailto:wdmaudiodev@xxxxxxxxxxxxx > Subscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=subscribe > Unsubscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=unsubscribe > Moderator: mailto:wdmaudiodev-moderators@xxxxxxxxxxxxx > > URL to WDMAUDIODEV page: > http://www.wdmaudiodev.com/ > >