Pete, I was hoping to have a joint release out before Christmas, but some family issues held me up, together with yet another library problem for the Mac. However, I've literally just received a suggestion to fix the library issue, so I'm going to give it a try and I'll be in a better position to make some predictions. Best wishes. Tim Burgess -----Original Message----- From: visurfacereader-bounce@xxxxxxxxxxxxx [mailto:visurfacereader-bounce@xxxxxxxxxxxxx] On Behalf Of ptorpey00@xxxxxxxxx Sent: 08 January 2014 13:15 To: visurfacereader@xxxxxxxxxxxxx Subject: [visurfacereader] Re: Surface reader and digi003 Tim, Just wondering if there is a status on the next release. Sounded like you were getting close to having a new version with some bug fixes before the holidays. Thanks and hope all goes well for you in the new year. --Pete -----Original Message----- From: visurfacereader-bounce@xxxxxxxxxxxxx [mailto:visurfacereader-bounce@xxxxxxxxxxxxx] On Behalf Of Tim Burgess Sent: Wednesday, January 08, 2014 6:57 AM To: visurfacereader@xxxxxxxxxxxxx Subject: [visurfacereader] Re: Surface reader and digi003 Nick, If you set up a protocol definition for the device it'll give you some feedback. Exactly what feedback you get will be down to what the device is capable of - if it's one-way communication with your software then the best you'll manage will be the ability to label controls and announce the MIDI value that they're transmitting. If it's two-way communication then there's the possibility of getting output more like you've experienced with your BCF/Mackie. You'll need to study the MIDI documentation for the device and the Advanced Configuration section of the SurfaceReader manual to figure out what's possible. Best wishes. Tim Burgess -----Original Message----- From: visurfacereader-bounce@xxxxxxxxxxxxx [mailto:visurfacereader-bounce@xxxxxxxxxxxxx] On Behalf Of Nick Daniels Sent: 07 January 2014 18:13 To: visurfacereader@xxxxxxxxxxxxx Subject: [visurfacereader] Re: Surface reader and digi003 oh yes and 1 other thing to add hear. i've aquired a korg nano controll surface unit around christmas time. can it be worked with surface reader?