[visurfacereader] Re: Surface reader and digi003
- From: <ptorpey00@xxxxxxxxx>
- To: <visurfacereader@xxxxxxxxxxxxx>
- Date: Wed, 8 Jan 2014 08:15:17 -0500
Tim,
Just wondering if there is a status on the next release. Sounded like you
were getting close to having a new version with some bug fixes before the
holidays.
Thanks and hope all goes well for you in the new year.
--Pete
-----Original Message-----
From: visurfacereader-bounce@xxxxxxxxxxxxx
[mailto:visurfacereader-bounce@xxxxxxxxxxxxx] On Behalf Of Tim Burgess
Sent: Wednesday, January 08, 2014 6:57 AM
To: visurfacereader@xxxxxxxxxxxxx
Subject: [visurfacereader] Re: Surface reader and digi003
Nick,
If you set up a protocol definition for the device it'll give you some
feedback. Exactly what feedback you get will be down to what the device is
capable of - if it's one-way communication with your software then the best
you'll manage will be the ability to label controls and announce the MIDI
value that they're transmitting. If it's two-way communication then there's
the possibility of getting output more like you've experienced with your
BCF/Mackie. You'll need to study the MIDI documentation for the device and
the Advanced Configuration section of the SurfaceReader manual to figure out
what's possible.
Best wishes.
Tim Burgess
-----Original Message-----
From: visurfacereader-bounce@xxxxxxxxxxxxx
[mailto:visurfacereader-bounce@xxxxxxxxxxxxx] On Behalf Of Nick Daniels
Sent: 07 January 2014 18:13
To: visurfacereader@xxxxxxxxxxxxx
Subject: [visurfacereader] Re: Surface reader and digi003
oh yes and 1 other thing to add hear.
i've aquired a korg nano controll surface unit around christmas time. can it
be worked with surface reader?
Other related posts:
