Nick, If you set up a protocol definition for the device it'll give you some feedback. Exactly what feedback you get will be down to what the device is capable of - if it's one-way communication with your software then the best you'll manage will be the ability to label controls and announce the MIDI value that they're transmitting. If it's two-way communication then there's the possibility of getting output more like you've experienced with your BCF/Mackie. You'll need to study the MIDI documentation for the device and the Advanced Configuration section of the SurfaceReader manual to figure out what's possible. Best wishes. Tim Burgess -----Original Message----- From: visurfacereader-bounce@xxxxxxxxxxxxx [mailto:visurfacereader-bounce@xxxxxxxxxxxxx] On Behalf Of Nick Daniels Sent: 07 January 2014 18:13 To: visurfacereader@xxxxxxxxxxxxx Subject: [visurfacereader] Re: Surface reader and digi003 oh yes and 1 other thing to add hear. i've aquired a korg nano controll surface unit around christmas time. can it be worked with surface reader?