Ah ok, but as I still want my existing Windows 7 system left in tact, I
assume I'd have to first take and image back-up and then do a system
restore on another drive to maintain the two operating systems?
Best,
Chris
On 02/02/2017 19:23, Phil Muir wrote:
Well if you do an upgrade then once authorised tell Windows 10 to do a reset
it will remove everything including all files from all other software so
it's fairly close to a clean install.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Ankin
Sent: 02 February 2017 17:42
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Ok thanks Phil,
I'll call them and try to blag a license tomorrow, otherwise for £100 I
might as well save all the hassle and just buy a non-machine specific
copy from Amazon and do a pristine install from the start.
Best,
Chris
On 02/02/2017 17:01, Phil Muir wrote:
I don't think you can do that because unless you have a version of Windows7
retail and you upgrade from that then the ISO for Windows 10 fromMicrosoft
won't authorize as that's a full retail rather than OEM so it's upgrade todeletes
Windows 10 and be done with it. I am ok here because Mac's always require
Windows retail copies so I can use the ISO from Microsoft.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf of Chris Ankin
Sent: 02 February 2017 16:54
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Phil,
To clarify further, if I wish to have both Win 7 and a clean install of
Win 10, I would first need to upgrade the Win 7 machine to Win 10 in
order to gain access to a Win 10 ISO, then retro grade that Win 10 back
to Win 7, then use the downloaded ISO to do a clean install of Win 10 on
another drive in order to retain both systems?
There's no way of obtaining the Win 10 license without all the
upgrading/downgrading, maybe through their accessability helpdesk?
Thanks,
Chris
On 02/02/2017 16:35, Phil Muir wrote:
Clean install is best or there's a thing you can do that basically
boxall old files off the system and returns your Windows 10 to the out of
cleanexperience.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Len Viljoen
Sent: 02 February 2017 14:42
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Oh yes you definitely can do that. However i do recommend a complete
Forinstall after upgrading. This definitely makes the pc run much better.
awaythat the windows pre installation environment can be used quiteeffectively.
cheersit,
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Matzura
Sent: Thursday, 02 February 2017 4:39 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
You can upgrade to Windows 10 completely accessibly. I did it, Juan did
Can did it and was my inspiration for doing it, it's all good.<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freeli
On Wed, 01 Feb 2017 09:44:36 -0500, you wrote:
yeah, please don't add this to your workload Steve. People should knowwrote:
that, for now, and to use various third-party tools, Hotspot Clicker is
necessary. Period.
I'm a little more annoyed by the thought of upgrading to Windows 10
here, if I absolutely must. (sigh)
Most of that is just the fact that I don't have computer literate
eyeballs around if speech goes away during the upgrade process. Anybody
else in this predicament want to talk strategies for smooth Win7 to
Win10 upgrades on Roger?
Chris
At 07:13 AM 2/1/2017, you wrote:
Steve. Don't know if I would bother because that's more overhead for
your good self. I can see it now. End user. "I can't get my HSC
sets to work." Us, "O wait, do you have HotSpotClicker installed?"
End user, "no I don't."
----------
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Spamer
Sent: 31 January 2017 21:26
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
HSC is usually the culpret here, but I'm not
sure that they are even HSC function calls. It
isn't the Samplitude script code though. I'm
seriously considering bringing out a Jaws only
download to go alongside an integrated version,
for folks who don't need HSC. Steve.
From: <mailto:kevjazz@xxxxxx>Kevin L Gibbs
Sent: Tuesday, January 31, 2017 9:12 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
By way of clarification, I'm running JFW 15 and
I have not done the hot fix because I seem to
get around the unknown function calls by simply
telling JAWS to shut up. I'll deal with it all
when the next version comes out. My thought is,
if it's only moderately broke, don't mess with
it once you've got it to work well enough.
On Jan 31, 2017, at 2:31 PM, Kevin Gibbs
<<mailto:kevjazz@xxxxxx>kevjazz@xxxxxx> wrote:
I have the same problem with unknown function
calls. If I stop speech with CTRL, they stop
and everything works fine, eventually.
Sent from my iPhone
On Jan 31, 2017, at 1:06 PM, Len Viljoen
<<mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>len@xxxxxxxxxxxxxxxxxxxxxxxx>
Actually with jaws 16 you shouldn't have any
problems. However that being said I'd
definitely recommend 17 or 18. But if you keep
having trouble I'll help you out with a tandum
if you want. Just let me know and we'll setup a time.
cheers
From:
sts.org[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounc
e@xxxxxxxxxxxxx]Enjoy.
anymore.On Behalf Of Liu Kai
Sent: Tuesday, 31 January 2017 9:02 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
I'm in jaws 16, I was cringing away from
getting jaws 18 but I may have no choice then?
From: <mailto:jprykiel@xxxxxxxxx>Jean-Philippe Rykiel
Sent: Tuesday, January 31, 2017 2:28 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Liu,
what is your Jaws version? I got this with Jaws 14 but not with 18
I'm on window 7 64 bits.
cheers,
JP
<http://www.jprykiel.com/>http://www.jprykiel.com
http://soundcloud.com/ryksounet
<http://twitter.com/ryksounet>http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykielLe
31/01/2017 à 19:16, Liu Kai a écrit :
TVTM
I think I might have spoken too soon unfortunately
I'm getting loads of unknown function call to:
so I've followed the sam access 3.0 readme and
uhh.. everything seems to have gone well.
all of my settings for audio has been fixed etc.
I finally hit alt f to open a new project and this is what happens.
jaws also restarts everytime.
I also did the hot fix.
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
hnireadstring
hnireadstring
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
hnireadstring
hnireadstring
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
hnireadstring
hnireadstring
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
hnireadstring
hnireadstring
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
hnireadstring
hnireadstring
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
getkeyassignmenthso
getkeyassignmenthso
unknown function call to:
getkeyassignmenthsw
getkeyassignmenthsw
unknown function call to:
hniwritesection
hniwritesection
From: <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>Len Viljoen
Sent: Tuesday, January 31, 2017 1:16 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Glad you got everything fixed mate. You got
hit by the magix low latency driver. Welcome to the club hahaha.
<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freelicheers
From:
sts.org[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounc
e@xxxxxxxxxxxxx]
On Behalf Of Liu Kai
Sent: Tuesday, 31 January 2017 7:11 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
TVTM
few, been at this for three days, things are
looking good, last problem I encountered was
that samplitude when I press y to do the ins file thing took jaws
vipaudioaccess@xxxxxxxxxxxxx.pluginsthere should be an additional step for persons
doing this alone, telling them to send jaws to
another soundcard before trying to press y to
open the ins file diologue. I thought that
samplitude kept crashing on me, I had already
typed out half the instructions of what I was
doing in an email to send here but then I took
a picture with my phone and sent it to someone
and they said that everything looked normal,
and then it hit me and I hooked up another
sound card to the system and routed jaws to it
and boom now I have everything up and running, just reinstalling
now.<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freeli
so excited.
From: <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>Len Viljoen
Sent: Tuesday, January 31, 2017 2:31 AM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Just checking liu. Did you remember to enter
your email address also? That could be the reason.
From:
sts.org[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounc
e@xxxxxxxxxxxxx]vipaudioaccess@xxxxxxxxxxxxx.
------------------------------------------On Behalf Of Liu Kai
Sent: Monday, 30 January 2017 10:04 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] problem with x3 suite
TVTM
Windows 10 64 bit 8 gb ram quad core processor
240gb ssd for programs 1tb wd black performance drive for samples
well, I downloaded the trial and I'm putting
in my serial for offline activation on my studio system.
however, I'm not sure where I'm going rong, I
click on activate with serial number.
and it just takes me back to the serial number field.
is it that I didn't put in the numbers
correctly? this window isn't moving and it
keeps going back to the edit field after I've typed in the numbers.
how do I know when I've put in the numbers
correctly, they say not to put in the dashes and I didn't.
can anyone verify for me if its supposed to be
30 digits or what's going on here?
thanks.
"There are two means of refuge from the miseries
of life: music and cats." - Albert Schweitzer
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
- To subscribe to the list, send an email to//www.freelists.org/archive/vipaudioaccess
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
- To subscribe to the list, send an email to//www.freelists.org/archive/vipaudioaccess
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
