I realize that there are benefits, Phil. Please
come over and upgrade my system. We have some top
British ales in the fridge just for you, and we
won't make you watch Coronation Street wiht us.
At 02:56 PM 2/1/2017, you wrote:
Well loving Windows 10. Loading files from SSD's is a lot faster and it runs
great.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Ankin
Sent: 01 February 2017 17:05
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Chris S,
I'm in the same boat regarding upgrading to Windows 10, I don't
particularly want to as my machine is running really well right now, I
still need to keep and use Sonar as I can work much faster in there, but
recogtnise the need to move on so Samplitude is the only alternative
consideration on Windows.
However the upgrade is scaring me, I only just got some hardware
installed which to cut a long story short didn't go as intended, my
mechanical hard drive crashed last year and I replaced the 500Gb disk
with a 1 TB mechanical drive as a temproary measure as it was cheap to
do so, and the plan was to use a 500Gb SSD as another replacement and a
1TB SSD for samples.
My friend who is supposed to be an I.T. professional hit a problem right
away in that he told me I can't easily shrink the 1TB mechanical drive
image (even though the data on it was around 350GB) and put it on the
new 500GB SSD, so after many hours of trying he resolved to do a direct
clone and use my new 1TB SSD which was intended for samples as the new
boot drive.
So right now I have a 500GB SSD that still needs fitting, my plan is to
get another 1TB SSD and clone my existing boot drive, do the Windows 10
upgrade, then shrink and partition the clone drive and get an ISO of Win
10 and revert back to Windows 7 to keep all my Sonar and HSC sets in
tact, install the ISO of Win 10 on the second SSD partition and have a
dual boot ~Win 7/ Win 10 machine.
I'll then free up the SSD for my samples again and still have another
500GB SSD spare.
I will also need to give freedom scientific another £350 just for the
pleasure of using Windows 10!
I'm not sure however I'm going to deal with any of the above as I'm not
particularly techie so if things go wrong I'll be up the creak without a
paddle, I'm partly considering just buying a new Windows 10 machine
maybe a powerful laptop just to avoid the whole palava.
Full marks if you managed to stay with and understand the above....
Best,
Chris
UK
On 01/02/2017 14:44, Chris Smart wrote:
> yeah, please don't add this to your workload Steve. People should know
> that, for now, and to use various third-party tools, Hotspot Clicker
> is necessary. Period.
>
> I'm a little more annoyed by the thought of upgrading to Windows 10
> here, if I absolutely must. (sigh)
>
> Most of that is just the fact that I don't have computer literate
> eyeballs around if speech goes away during the upgrade process.
> Anybody else in this predicament want to talk strategies for smooth
> Win7 to Win10 upgrades on Roger?
>
> Chris
>
> At 07:13 AM 2/1/2017, you wrote:
>> Steve. Don't know if I would bother because that's more overhead for
>> your good self. I can see it now. End user. "I can't get my HSC
>> sets to work." Us, "O wait, do you have HotSpotClicker installed?"
>> End user, "no I don't."
>>
>>
>> ----------
>> From: vipaudioaccess-bounce@xxxxxxxxxxxxx
>> [mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Spamer
>> Sent: 31 January 2017 21:26
>> To: vipaudioaccess@xxxxxxxxxxxxx
>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>
>> HSC is usually the culpret here, but I'm not sure that they are even
>> HSC function calls. It isn't the Samplitude script code though. I'm
>> seriously considering bringing out a Jaws only download to go
>> alongside an integrated version, for folks who don't need HSC. Steve.
>>
>> From: <mailto:kevjazz@xxxxxx>Kevin L Gibbs
>> Sent: Tuesday, January 31, 2017 9:12 PM
>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>
>> By way of clarification, I'm running JFW 15 and I have not done the
>> hot fix because I seem to get around the unknown function calls by
>> simply telling JAWS to shut up. I'll deal with it all when the next
>> version comes out. My thought is, if it's only moderately broke,
>> don't mess with it once you've got it to work well enough.
>>> On Jan 31, 2017, at 2:31 PM, Kevin Gibbs
>>> <<mailto:kevjazz@xxxxxx>kevjazz@xxxxxx> wrote:
>>>
>>> I have the same problem with unknown function calls. If I stop
>>> speech with CTRL, they stop and everything works fine, eventually.
>>>
>>> Sent from my iPhone
>>>
>>> On Jan 31, 2017, at 1:06 PM, Len Viljoen
>>> <<mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>len@xxxxxxxxxxxxxxxxxxxxxxxx>
>>> wrote:
>>>> Actually with jaws 16 you shouldn't have any problems. However that
>>>> being said I'd definitely recommend 17 or 18. But if you keep
>>>> having trouble I'll help you out with a tandum if you want. Just
>>>> let me know and we'll setup a time.
>>>> cheers
>>>>
>>>> From:
>>>>
<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freelists.
org
>>>>
[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounce@fr
eelists.org]
>>>> On Behalf Of Liu Kai
>>>> Sent: Tuesday, 31 January 2017 9:02 PM
>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>> I'm in jaws 16, I was cringing away from getting jaws 18 but I may
>>>> have no choice then?
>>>>
>>>>
>>>>
>>>>
>>>> From: <mailto:jprykiel@xxxxxxxxx>Jean-Philippe Rykiel
>>>> Sent: Tuesday, January 31, 2017 2:28 PM
>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>>
>>>> Liu,
>>>>
>>>> what is your Jaws version? I got this with Jaws 14 but not with 18
>>>> anymore.
>>>>
>>>> I'm on window 7 64 bits.
>>>>
>>>> cheers,
>>>>
>>>> JP
>>>>
>>>>
>>>>
>>>> <http://www.jprykiel.com/>http://www.jprykiel.com
>>>> http://soundcloud.com/ryksounet
>>>> <http://twitter.com/ryksounet>http://twitter.com/ryksounet
>>>> http://facebook.com/jeanphilipperykielLe 31/01/2017 à 19:16, Liu
>>>> Kai a écrit :
>>>> TVTM
>>>> I think I might have spoken too soon unfortunately
>>>> I'm getting loads of unknown function call to:
>>>> so I've followed the sam access 3.0 readme and uhh.. everything
>>>> seems to have gone well.
>>>> all of my settings for audio has been fixed etc.
>>>> I finally hit alt f to open a new project and this is what happens.
>>>> jaws also restarts everytime.
>>>> I also did the hot fix.
>>>>
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> hnireadstring
>>>> hnireadstring
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> hnireadstring
>>>> hnireadstring
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> hnireadstring
>>>> hnireadstring
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> hnireadstring
>>>> hnireadstring
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> hnireadstring
>>>> hnireadstring
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> wlstringequal
>>>> wlstringequal
>>>> unknown function call to:
>>>> getkeyassignmenthso
>>>> getkeyassignmenthso
>>>> unknown function call to:
>>>> getkeyassignmenthsw
>>>> getkeyassignmenthsw
>>>> unknown function call to:
>>>> hniwritesection
>>>> hniwritesection
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> From: <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>Len Viljoen
>>>> Sent: Tuesday, January 31, 2017 1:16 PM
>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>> Glad you got everything fixed mate. You got hit by the magix low
>>>> latency driver. Welcome to the club hahaha. Enjoy.
>>>> cheers
>>>>
>>>> From:
>>>>
<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freelists.
org
>>>>
[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounce@fr
eelists.org]
>>>> On Behalf Of Liu Kai
>>>> Sent: Tuesday, 31 January 2017 7:11 PM
>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>> TVTM
>>>> few, been at this for three days, things are looking good, last
>>>> problem I encountered was that samplitude when I press y to do the
>>>> ins file thing took jaws away
>>>> there should be an additional step for persons doing this alone,
>>>> telling them to send jaws to another soundcard before trying to
>>>> press y to open the ins file diologue. I thought that samplitude
>>>> kept crashing on me, I had already typed out half the instructions
>>>> of what I was doing in an email to send here but then I took a
>>>> picture with my phone and sent it to someone and they said that
>>>> everything looked normal, and then it hit me and I hooked up
>>>> another sound card to the system and routed jaws to it and boom now
>>>> I have everything up and running, just reinstalling plugins now.
>>>> so excited.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> From: <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>Len Viljoen
>>>> Sent: Tuesday, January 31, 2017 2:31 AM
>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>> Just checking liu. Did you remember to enter your email address
>>>> also? That could be the reason.
>>>>
>>>> From:
>>>>
<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freelists.
org
>>>>
[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounce@fr
eelists.org]
>>>> On Behalf Of Liu Kai
>>>> Sent: Monday, 30 January 2017 10:04 PM
>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>> Subject: [vipaudioaccess] problem with x3 suite
>>>>
>>>> TVTM
>>>> Windows 10 64 bit 8 gb ram quad core processor 240gb ssd for
>>>> programs 1tb wd black performance drive for samples
>>>> well, I downloaded the trial and I'm putting in my serial for
>>>> offline activation on my studio system.
>>>> however, I'm not sure where I'm going rong, I click on activate
>>>> with serial number.
>>>> and it just takes me back to the serial number field.
>>>> is it that I didn't put in the numbers correctly? this window isn't
>>>> moving and it keeps going back to the edit field after I've typed
>>>> in the numbers.
>>>> how do I know when I've put in the numbers correctly, they say not
>>>> to put in the dashes and I didn't.
>>>> can anyone verify for me if its supposed to be 30 digits or what's
>>>> going on here?
>>>> thanks.
>>
>
>
>
> ----------------------------------------
> "There are two means of refuge from the miseries of life: music and
> cats." - Albert Schweitzer
> --
> - To post to the mailing list, simply send email to
> vipaudioaccess@xxxxxxxxxxxxx.
> - To subscribe to the list, send an email to
> vipaudioaccess-request@xxxxxxxxxxxxx with 'subscribe' in the Subject
> field.
>
> - To unsubscribe from the list, send an email to
> vipaudioaccess-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject
> field.
>
> - For more list options, like setting digest and vacation modes, visit
> //www.freelists.org/list/vipaudioaccess
> - Online, searchable archives of the list are available at
> //www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at //www.freelists.org/archive/vipaudioaccess
