agreed for the most part, same here, however, I'm getting a slight wierdness
when switching windows from samplitude to lets say the html help file and
back
-----Original Message-----
From: Phil Muir
Sent: Wednesday, February 01, 2017 3:56 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Well loving Windows 10. Loading files from SSD's is a lot faster and it runs
great.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Ankin
Sent: 01 February 2017 17:05
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Chris S,
I'm in the same boat regarding upgrading to Windows 10, I don't
particularly want to as my machine is running really well right now, I
still need to keep and use Sonar as I can work much faster in there, but
recogtnise the need to move on so Samplitude is the only alternative
consideration on Windows.
However the upgrade is scaring me, I only just got some hardware
installed which to cut a long story short didn't go as intended, my
mechanical hard drive crashed last year and I replaced the 500Gb disk
with a 1 TB mechanical drive as a temproary measure as it was cheap to
do so, and the plan was to use a 500Gb SSD as another replacement and a
1TB SSD for samples.
My friend who is supposed to be an I.T. professional hit a problem right
away in that he told me I can't easily shrink the 1TB mechanical drive
image (even though the data on it was around 350GB) and put it on the
new 500GB SSD, so after many hours of trying he resolved to do a direct
clone and use my new 1TB SSD which was intended for samples as the new
boot drive.
So right now I have a 500GB SSD that still needs fitting, my plan is to
get another 1TB SSD and clone my existing boot drive, do the Windows 10
upgrade, then shrink and partition the clone drive and get an ISO of Win
10 and revert back to Windows 7 to keep all my Sonar and HSC sets in
tact, install the ISO of Win 10 on the second SSD partition and have a
dual boot ~Win 7/ Win 10 machine.
I'll then free up the SSD for my samples again and still have another
500GB SSD spare.
I will also need to give freedom scientific another £350 just for the
pleasure of using Windows 10!
I'm not sure however I'm going to deal with any of the above as I'm not
particularly techie so if things go wrong I'll be up the creak without a
paddle, I'm partly considering just buying a new Windows 10 machine
maybe a powerful laptop just to avoid the whole palava.
Full marks if you managed to stay with and understand the above....
Best,
Chris
UK
On 01/02/2017 14:44, Chris Smart wrote:
yeah, please don't add this to your workload Steve. People should know<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freelists.
that, for now, and to use various third-party tools, Hotspot Clicker
is necessary. Period.
I'm a little more annoyed by the thought of upgrading to Windows 10
here, if I absolutely must. (sigh)
Most of that is just the fact that I don't have computer literate
eyeballs around if speech goes away during the upgrade process.
Anybody else in this predicament want to talk strategies for smooth
Win7 to Win10 upgrades on Roger?
Chris
At 07:13 AM 2/1/2017, you wrote:
Steve. Don't know if I would bother because that's more overhead for
your good self. I can see it now. End user. "I can't get my HSC
sets to work." Us, "O wait, do you have HotSpotClicker installed?"
End user, "no I don't."
----------
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Spamer
Sent: 31 January 2017 21:26
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
HSC is usually the culpret here, but I'm not sure that they are even
HSC function calls. It isn't the Samplitude script code though. I'm
seriously considering bringing out a Jaws only download to go
alongside an integrated version, for folks who don't need HSC. Steve.
From: <mailto:kevjazz@xxxxxx>Kevin L Gibbs
Sent: Tuesday, January 31, 2017 9:12 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
By way of clarification, I'm running JFW 15 and I have not done the
hot fix because I seem to get around the unknown function calls by
simply telling JAWS to shut up. I'll deal with it all when the next
version comes out. My thought is, if it's only moderately broke,
don't mess with it once you've got it to work well enough.
On Jan 31, 2017, at 2:31 PM, Kevin Gibbs
<<mailto:kevjazz@xxxxxx>kevjazz@xxxxxx> wrote:
I have the same problem with unknown function calls. If I stop
speech with CTRL, they stop and everything works fine, eventually.
Sent from my iPhone
On Jan 31, 2017, at 1:06 PM, Len Viljoen
<<mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>len@xxxxxxxxxxxxxxxxxxxxxxxx>
wrote:
Actually with jaws 16 you shouldn't have any problems. However that
being said I'd definitely recommend 17 or 18. But if you keep
having trouble I'll help you out with a tandum if you want. Just
let me know and we'll setup a time.
cheers
From:
[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounce@fr
<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freelists.On Behalf Of Liu Kai
Sent: Tuesday, 31 January 2017 9:02 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
I'm in jaws 16, I was cringing away from getting jaws 18 but I may
have no choice then?
From: <mailto:jprykiel@xxxxxxxxx>Jean-Philippe Rykiel
Sent: Tuesday, January 31, 2017 2:28 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Liu,
what is your Jaws version? I got this with Jaws 14 but not with 18
anymore.
I'm on window 7 64 bits.
cheers,
JP
<http://www.jprykiel.com/>http://www.jprykiel.com
http://soundcloud.com/ryksounet
<http://twitter.com/ryksounet>http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykielLe 31/01/2017 à 19:16, Liu
Kai a écrit :
TVTM
I think I might have spoken too soon unfortunately
I'm getting loads of unknown function call to:
so I've followed the sam access 3.0 readme and uhh.. everything
seems to have gone well.
all of my settings for audio has been fixed etc.
I finally hit alt f to open a new project and this is what happens.
jaws also restarts everytime.
I also did the hot fix.
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
hnireadstring
hnireadstring
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
hnireadstring
hnireadstring
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
hnireadstring
hnireadstring
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
hnireadstring
hnireadstring
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
hnireadstring
hnireadstring
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
wlstringequal
wlstringequal
unknown function call to:
getkeyassignmenthso
getkeyassignmenthso
unknown function call to:
getkeyassignmenthsw
getkeyassignmenthsw
unknown function call to:
hniwritesection
hniwritesection
From: <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>Len Viljoen
Sent: Tuesday, January 31, 2017 1:16 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Glad you got everything fixed mate. You got hit by the magix low
latency driver. Welcome to the club hahaha. Enjoy.
cheers
From:
[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounce@fr
<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freelists.On Behalf Of Liu Kai
Sent: Tuesday, 31 January 2017 7:11 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
TVTM
few, been at this for three days, things are looking good, last
problem I encountered was that samplitude when I press y to do the
ins file thing took jaws away
there should be an additional step for persons doing this alone,
telling them to send jaws to another soundcard before trying to
press y to open the ins file diologue. I thought that samplitude
kept crashing on me, I had already typed out half the instructions
of what I was doing in an email to send here but then I took a
picture with my phone and sent it to someone and they said that
everything looked normal, and then it hit me and I hooked up
another sound card to the system and routed jaws to it and boom now
I have everything up and running, just reinstalling plugins now.
so excited.
From: <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>Len Viljoen
Sent: Tuesday, January 31, 2017 2:31 AM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Just checking liu. Did you remember to enter your email address
also? That could be the reason.
From:
[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounce@fr
On Behalf Of Liu Kai
Sent: Monday, 30 January 2017 10:04 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] problem with x3 suite
TVTM
Windows 10 64 bit 8 gb ram quad core processor 240gb ssd for
programs 1tb wd black performance drive for samples
well, I downloaded the trial and I'm putting in my serial for
offline activation on my studio system.
however, I'm not sure where I'm going rong, I click on activate
with serial number.
and it just takes me back to the serial number field.
is it that I didn't put in the numbers correctly? this window isn't
moving and it keeps going back to the edit field after I've typed
in the numbers.
how do I know when I've put in the numbers correctly, they say not
to put in the dashes and I didn't.
can anyone verify for me if its supposed to be 30 digits or what's
going on here?
thanks.
----------------------------------------
"There are two means of refuge from the miseries of life: music and
cats." - Albert Schweitzer
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx with 'subscribe' in the Subject
field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject
field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
