ok. sounds fairly safe. (grin)
At 02:23 PM 2/2/2017, you wrote:
Well if you do an upgrade then once authorised tell Windows 10 to do a reset
it will remove everything including all files from all other software so
it's fairly close to a clean install.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Ankin
Sent: 02 February 2017 17:42
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
Ok thanks Phil,
I'll call them and try to blag a license tomorrow, otherwise for £100 I
might as well save all the hassle and just buy a non-machine specific
copy from Amazon and do a pristine install from the start.
Best,
Chris
On 02/02/2017 17:01, Phil Muir wrote:
> I don't think you can do that because unless you have a version of Windows
7
> retail and you upgrade from that then the ISO for Windows 10 from
Microsoft
> won't authorize as that's a full retail rather than OEM so it's upgrade to
> Windows 10 and be done with it. I am ok here because Mac's always require
> Windows retail copies so I can use the ISO from Microsoft.
>
> -----Original Message-----
> From: vipaudioaccess-bounce@xxxxxxxxxxxxx
> [mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf of Chris Ankin
> Sent: 02 February 2017 16:54
> To: vipaudioaccess@xxxxxxxxxxxxx
> Subject: [vipaudioaccess] Re: problem with x3 suite
>
> Phil,
>
>
> To clarify further, if I wish to have both Win 7 and a clean install of
> Win 10, I would first need to upgrade the Win 7 machine to Win 10 in
> order to gain access to a Win 10 ISO, then retro grade that Win 10 back
> to Win 7, then use the downloaded ISO to do a clean install of Win 10 on
> another drive in order to retain both systems?
>
>
> There's no way of obtaining the Win 10 license without all the
> upgrading/downgrading, maybe through their accessability helpdesk?
>
>
> Thanks,
>
>
> Chris
>
>
>
> On 02/02/2017 16:35, Phil Muir wrote:
>> Clean install is best or there's a thing you can do that basically
deletes
>> all old files off the system and returns your Windows 10 to the out of
box
>> experience.
>>
>> -----Original Message-----
>> From: vipaudioaccess-bounce@xxxxxxxxxxxxx
>> [mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Len Viljoen
>> Sent: 02 February 2017 14:42
>> To: vipaudioaccess@xxxxxxxxxxxxx
>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>
>> Oh yes you definitely can do that. However i do recommend a complete
clean
>> install after upgrading. This definitely makes the pc run much better.
For
>> that the windows pre installation environment can be used quite
> effectively.
>> cheers
>>
>> -----Original Message-----
>> From: vipaudioaccess-bounce@xxxxxxxxxxxxx
>> [mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Matzura
>> Sent: Thursday, 02 February 2017 4:39 PM
>> To: vipaudioaccess@xxxxxxxxxxxxx
>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>
>> You can upgrade to Windows 10 completely accessibly. I did it, Juan did
> it,
>> Can did it and was my inspiration for doing it, it's all good.
>>
>> On Wed, 01 Feb 2017 09:44:36 -0500, you wrote:
>>
>>> yeah, please don't add this to your workload Steve. People should know
>>> that, for now, and to use various third-party tools, Hotspot Clicker is
>>> necessary. Period.
>>>
>>> I'm a little more annoyed by the thought of upgrading to Windows 10
>>> here, if I absolutely must. (sigh)
>>>
>>> Most of that is just the fact that I don't have computer literate
>>> eyeballs around if speech goes away during the upgrade process. Anybody
>>> else in this predicament want to talk strategies for smooth Win7 to
>>> Win10 upgrades on Roger?
>>>
>>> Chris
>>>
>>> At 07:13 AM 2/1/2017, you wrote:
>>>> Steve. Don't know if I would bother because that's more overhead for
>>>> your good self. I can see it now. End user. "I can't get my HSC
>>>> sets to work." Us, "O wait, do you have HotSpotClicker installed?"
>>>> End user, "no I don't."
>>>>
>>>>
>>>> ----------
>>>> From: vipaudioaccess-bounce@xxxxxxxxxxxxx
>>>> [mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Spamer
>>>> Sent: 31 January 2017 21:26
>>>> To: vipaudioaccess@xxxxxxxxxxxxx
>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>> HSC is usually the culpret here, but I'm not
>>>> sure that they are even HSC function calls. It
>>>> isn't the Samplitude script code though. I'm
>>>> seriously considering bringing out a Jaws only
>>>> download to go alongside an integrated version,
>>>> for folks who don't need HSC. Steve.
>>>>
>>>> From: <mailto:kevjazz@xxxxxx>Kevin L Gibbs
>>>> Sent: Tuesday, January 31, 2017 9:12 PM
>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>> By way of clarification, I'm running JFW 15 and
>>>> I have not done the hot fix because I seem to
>>>> get around the unknown function calls by simply
>>>> telling JAWS to shut up. I'll deal with it all
>>>> when the next version comes out. My thought is,
>>>> if it's only moderately broke, don't mess with
>>>> it once you've got it to work well enough.
>>>>> On Jan 31, 2017, at 2:31 PM, Kevin Gibbs
>>>>> <<mailto:kevjazz@xxxxxx>kevjazz@xxxxxx> wrote:
>>>>>
>>>>> I have the same problem with unknown function
>>>>> calls. If I stop speech with CTRL, they stop
>>>>> and everything works fine, eventually.
>>>>>
>>>>> Sent from my iPhone
>>>>>
>>>>> On Jan 31, 2017, at 1:06 PM, Len Viljoen
>>>>> <<mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>len@xxxxxxxxxxxxxxxxxxxxxxxx>
>> wrote:
>>>>>> Actually with jaws 16 you shouldn't have any
>>>>>> problems. However that being said I'd
>>>>>> definitely recommend 17 or 18. But if you keep
>>>>>> having trouble I'll help you out with a tandum
>>>>>> if you want. Just let me know and we'll setup a time.
>>>>>> cheers
>>>>>>
>>>>>> From:
>>>>>>
> <mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freeli
>> sts.org
> [<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounc
>> e@xxxxxxxxxxxxx]
>>>>>> On Behalf Of Liu Kai
>>>>>> Sent: Tuesday, 31 January 2017 9:02 PM
>>>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>>>
>>>>>> I'm in jaws 16, I was cringing away from
>>>>>> getting jaws 18 but I may have no choice then?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: <mailto:jprykiel@xxxxxxxxx>Jean-Philippe Rykiel
>>>>>> Sent: Tuesday, January 31, 2017 2:28 PM
>>>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>>>
>>>>>>
>>>>>> Liu,
>>>>>>
>>>>>> what is your Jaws version? I got this with Jaws 14 but not with 18
>> anymore.
>>>>>> I'm on window 7 64 bits.
>>>>>>
>>>>>> cheers,
>>>>>>
>>>>>> JP
>>>>>>
>>>>>>
>>>>>>
>>>>>> <http://www.jprykiel.com/>http://www.jprykiel.com
>>>>>> http://soundcloud.com/ryksounet
>>>>>> <http://twitter.com/ryksounet>http://twitter.com/ryksounet
>>>>>> http://facebook.com/jeanphilipperykielLe
>>>>>> 31/01/2017 à 19:16, Liu Kai a écrit :
>>>>>> TVTM
>>>>>> I think I might have spoken too soon unfortunately
>>>>>> I'm getting loads of unknown function call to:
>>>>>> so I've followed the sam access 3.0 readme and
>>>>>> uhh.. everything seems to have gone well.
>>>>>> all of my settings for audio has been fixed etc.
>>>>>> I finally hit alt f to open a new project and this is what happens.
>>>>>> jaws also restarts everytime.
>>>>>> I also did the hot fix.
>>>>>>
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> hnireadstring
>>>>>> hnireadstring
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> hnireadstring
>>>>>> hnireadstring
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> hnireadstring
>>>>>> hnireadstring
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> hnireadstring
>>>>>> hnireadstring
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> hnireadstring
>>>>>> hnireadstring
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> wlstringequal
>>>>>> wlstringequal
>>>>>> unknown function call to:
>>>>>> getkeyassignmenthso
>>>>>> getkeyassignmenthso
>>>>>> unknown function call to:
>>>>>> getkeyassignmenthsw
>>>>>> getkeyassignmenthsw
>>>>>> unknown function call to:
>>>>>> hniwritesection
>>>>>> hniwritesection
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>Len Viljoen
>>>>>> Sent: Tuesday, January 31, 2017 1:16 PM
>>>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>>>
>>>>>> Glad you got everything fixed mate. You got
>>>>>> hit by the magix low latency driver. Welcome to the club hahaha.
> Enjoy.
>>>>>> cheers
>>>>>>
>>>>>> From:
>>>>>>
> <mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freeli
>> sts.org
> [<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounc
>> e@xxxxxxxxxxxxx]
>>>>>> On Behalf Of Liu Kai
>>>>>> Sent: Tuesday, 31 January 2017 7:11 PM
>>>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>>>
>>>>>> TVTM
>>>>>> few, been at this for three days, things are
>>>>>> looking good, last problem I encountered was
>>>>>> that samplitude when I press y to do the ins file thing took jaws
away
>>>>>> there should be an additional step for persons
>>>>>> doing this alone, telling them to send jaws to
>>>>>> another soundcard before trying to press y to
>>>>>> open the ins file diologue. I thought that
>>>>>> samplitude kept crashing on me, I had already
>>>>>> typed out half the instructions of what I was
>>>>>> doing in an email to send here but then I took
>>>>>> a picture with my phone and sent it to someone
>>>>>> and they said that everything looked normal,
>>>>>> and then it hit me and I hooked up another
>>>>>> sound card to the system and routed jaws to it
>>>>>> and boom now I have everything up and running, just reinstalling
> plugins
>> now.
>>>>>> so excited.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>Len Viljoen
>>>>>> Sent: Tuesday, January 31, 2017 2:31 AM
>>>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>>> Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>>>
>>>>>> Just checking liu. Did you remember to enter
>>>>>> your email address also? That could be the reason.
>>>>>>
>>>>>> From:
>>>>>>
> <mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freeli
>> sts.org
> [<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounc
>> e@xxxxxxxxxxxxx]
>>>>>> On Behalf Of Liu Kai
>>>>>> Sent: Monday, 30 January 2017 10:04 PM
>>>>>> To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>>> Subject: [vipaudioaccess] problem with x3 suite
>>>>>>
>>>>>> TVTM
>>>>>> Windows 10 64 bit 8 gb ram quad core processor
>>>>>> 240gb ssd for programs 1tb wd black performance drive for samples
>>>>>> well, I downloaded the trial and I'm putting
>>>>>> in my serial for offline activation on my studio system.
>>>>>> however, I'm not sure where I'm going rong, I
>>>>>> click on activate with serial number.
>>>>>> and it just takes me back to the serial number field.
>>>>>> is it that I didn't put in the numbers
>>>>>> correctly? this window isn't moving and it
>>>>>> keeps going back to the edit field after I've typed in the numbers.
>>>>>> how do I know when I've put in the numbers
>>>>>> correctly, they say not to put in the dashes and I didn't.
>>>>>> can anyone verify for me if its supposed to be
>>>>>> 30 digits or what's going on here?
>>>>>> thanks.
>>>
>>> ----------------------------------------
>>> "There are two means of refuge from the miseries
>>> of life: music and cats." - Albert Schweitzer
>> --
>> - To post to the mailing list, simply send email to
>> vipaudioaccess@xxxxxxxxxxxxx.
>>
>> - To subscribe to the list, send an email to
>> vipaudioaccess-request@xxxxxxxxxxxxx
>> with 'subscribe' in the Subject field.
>>
>> - To unsubscribe from the list, send an email to
>> vipaudioaccess-request@xxxxxxxxxxxxx
>> with 'unsubscribe' in the Subject field.
>>
>> - For more list options, like setting digest and vacation modes, visit
>> //www.freelists.org/list/vipaudioaccess
>>
>> - Online, searchable archives of the list are available at
>> //www.freelists.org/archive/vipaudioaccess
>>
>> --
>> - To post to the mailing list, simply send email to
>> vipaudioaccess@xxxxxxxxxxxxx.
>>
>> - To subscribe to the list, send an email to
>> vipaudioaccess-request@xxxxxxxxxxxxx
>> with 'subscribe' in the Subject field.
>>
>> - To unsubscribe from the list, send an email to
>> vipaudioaccess-request@xxxxxxxxxxxxx
>> with 'unsubscribe' in the Subject field.
>>
>> - For more list options, like setting digest and vacation modes, visit
>> //www.freelists.org/list/vipaudioaccess
>>
>> - Online, searchable archives of the list are available at
>> //www.freelists.org/archive/vipaudioaccess
>>
>> --
>> - To post to the mailing list, simply send email to
> vipaudioaccess@xxxxxxxxxxxxx.
>> - To subscribe to the list, send an email to
>> vipaudioaccess-request@xxxxxxxxxxxxx
>> with 'subscribe' in the Subject field.
>>
>> - To unsubscribe from the list, send an email to
>> vipaudioaccess-request@xxxxxxxxxxxxx
>> with 'unsubscribe' in the Subject field.
>>
>> - For more list options, like setting digest and vacation modes, visit
>> //www.freelists.org/list/vipaudioaccess
>>
>> - Online, searchable archives of the list are available at
> //www.freelists.org/archive/vipaudioaccess
>
> --
> - To post to the mailing list, simply send email to
> vipaudioaccess@xxxxxxxxxxxxx.
>
> - To subscribe to the list, send an email to
> vipaudioaccess-request@xxxxxxxxxxxxx
> with 'subscribe' in the Subject field.
>
> - To unsubscribe from the list, send an email to
> vipaudioaccess-request@xxxxxxxxxxxxx
> with 'unsubscribe' in the Subject field.
>
> - For more list options, like setting digest and vacation modes, visit
> //www.freelists.org/list/vipaudioaccess
>
> - Online, searchable archives of the list are available at
> //www.freelists.org/archive/vipaudioaccess
>
> --
> - To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
>
> - To subscribe to the list, send an email to
> vipaudioaccess-request@xxxxxxxxxxxxx
> with 'subscribe' in the Subject field.
>
> - To unsubscribe from the list, send an email to
> vipaudioaccess-request@xxxxxxxxxxxxx
> with 'unsubscribe' in the Subject field.
>
> - For more list options, like setting digest and vacation modes, visit
> //www.freelists.org/list/vipaudioaccess
>
> - Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at //www.freelists.org/archive/vipaudioaccess
