to be quite honest, I still have my sonar win 7 rig up and able to runn.
however I've connected all hardware to my samplitude set up. I didn't want
to risk upgrading to win10 and things going crazy with no form of going back
to what I had before, if this wasn't what I wanted.
the system I built is a bit more powerful than my win 7 rig though, but I'm
not tempted to go back on there because it would take me hooking up
all my hardware etc. so I'm chugging along with samplitude for the while. a
psunami of questions coming soon. lol
-----Original Message-----
From: Chris Smart
Sent: Thursday, February 02, 2017 11:34 AM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
that's what puts me off, having to completely
reinstall everything from scratch again.
At 09:42 AM 2/2/2017, you wrote:
Oh yes you definitely can do that. However i do recommend a complete clean
install after upgrading. This definitely makes the pc run much better. For
that the windows pre installation environment can be used quite effectively.
cheers
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Matzura
Sent: Thursday, 02 February 2017 4:39 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: problem with x3 suite
You can upgrade to Windows 10 completely accessibly. I did it, Juan did it,
Can did it and was my inspiration for doing it, it's all good.
On Wed, 01 Feb 2017 09:44:36 -0500, you wrote:
>yeah, please don't add this to your workload Steve. People should know
>that, for now, and to use various third-party tools, Hotspot Clicker is
>necessary. Period.
>
>I'm a little more annoyed by the thought of upgrading to Windows 10
>here, if I absolutely must. (sigh)
>
>Most of that is just the fact that I don't have computer literate
>eyeballs around if speech goes away during the upgrade process. Anybody
>else in this predicament want to talk strategies for smooth Win7 to
>Win10 upgrades on Roger?
>
>Chris
>
>At 07:13 AM 2/1/2017, you wrote:
>>Steve. Don’t know if I would bother because that’s more overhead for
>>your good self. I can see it now. End user. “I can’t get my HSC
>>sets to work.” Us, “O wait, do you have HotSpotClicker installed?”
>>End user, “no I don’t.”
>>
>>
>>----------
>>From: vipaudioaccess-bounce@xxxxxxxxxxxxx
>>[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Spamer
>>Sent: 31 January 2017 21:26
>>To: vipaudioaccess@xxxxxxxxxxxxx
>>Subject: [vipaudioaccess] Re: problem with x3 suite
>>
>>HSC is usually the culpret here, but I’m not
>>sure that they are even HSC function calls. It
>>isn’t the Samplitude script code though. I’m
>>seriously considering bringing out a Jaws only
>>download to go alongside an integrated version,
>>for folks who don’t need HSC. Steve.
>>
>>From: <mailto:kevjazz@xxxxxx>Kevin L Gibbs
>>Sent: Tuesday, January 31, 2017 9:12 PM
>>To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>Subject: [vipaudioaccess] Re: problem with x3 suite
>>
>>By way of clarification, I’m running JFW 15 and
>>I have not done the hot fix because I seem to
>>get around the unknown function calls by simply
>>telling JAWS to shut up. I’ll deal with it all
>>when the next version comes out. My thought is,
>>if it’s only moderately broke, don’t mess with
>>it once you’ve got it to work well enough.
>>>On Jan 31, 2017, at 2:31 PM, Kevin Gibbs
>>><<mailto:kevjazz@xxxxxx>kevjazz@xxxxxx> wrote:
>>>
>>>I have the same problem with unknown function
>>>calls. If I stop speech with CTRL, they stop
>>>and everything works fine, eventually.
>>>
>>>Sent from my iPhone
>>>
>>>On Jan 31, 2017, at 1:06 PM, Len Viljoen
>>><<mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>len@xxxxxxxxxxxxxxxxxxxxxxxx>
wrote:
>>>>Actually with jaws 16 you shouldn’t have any
>>>>problems. However that being said I’d
>>>>definitely recommend 17 or 18. But if you keep
>>>>having trouble I’ll help you out with a tandum
>>>>if you want. Just let me know and we’ll setup a time.
>>>>cheers
>>>>
>>>>From:
>>>><mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freeli
sts.org
>>>>[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounc
e@xxxxxxxxxxxxx]
>>>>On Behalf Of Liu Kai
>>>>Sent: Tuesday, 31 January 2017 9:02 PM
>>>>To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>>I’m in jaws 16, I was cringing away from
>>>>getting jaws 18 but I may have no choice then?
>>>>
>>>>
>>>>
>>>>
>>>>From: <mailto:jprykiel@xxxxxxxxx>Jean-Philippe Rykiel
>>>>Sent: Tuesday, January 31, 2017 2:28 PM
>>>>To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>>
>>>>Liu,
>>>>
>>>>what is your Jaws version? I got this with Jaws 14 but not with 18
anymore.
>>>>
>>>>I'm on window 7 64 bits.
>>>>
>>>>cheers,
>>>>
>>>>JP
>>>>
>>>>
>>>>
>>>><http://www.jprykiel.com/>http://www.jprykiel.com
>>>>http://soundcloud.com/ryksounet
>>>><http://twitter.com/ryksounet>http://twitter.com/ryksounet
>>>>http://facebook.com/jeanphilipperykielLe
>>>>31/01/2017 à 19:16, Liu Kai a écrit :
>>>>TVTM
>>>>I think I might have spoken too soon unfortunately
>>>>I’m getting loads of unknown function call to:
>>>>so I’ve followed the sam access 3.0 readme and
>>>>uhh.. everything seems to have gone well.
>>>>all of my settings for audio has been fixed etc.
>>>>I finally hit alt f to open a new project and this is what happens.
>>>>jaws also restarts everytime.
>>>>I also did the hot fix.
>>>>
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>hnireadstring
>>>>hnireadstring
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>hnireadstring
>>>>hnireadstring
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>hnireadstring
>>>>hnireadstring
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>hnireadstring
>>>>hnireadstring
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>hnireadstring
>>>>hnireadstring
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>wlstringequal
>>>>wlstringequal
>>>>unknown function call to:
>>>>getkeyassignmenthso
>>>>getkeyassignmenthso
>>>>unknown function call to:
>>>>getkeyassignmenthsw
>>>>getkeyassignmenthsw
>>>>unknown function call to:
>>>>hniwritesection
>>>>hniwritesection
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>From: <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>Len Viljoen
>>>>Sent: Tuesday, January 31, 2017 1:16 PM
>>>>To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>>Glad you got everything fixed mate. You got
>>>>hit by the magix low latency driver. Welcome to the club hahaha. >>>>Enjoy.
>>>>cheers
>>>>
>>>>From:
>>>><mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freeli
sts.org
>>>>[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounc
e@xxxxxxxxxxxxx]
>>>>On Behalf Of Liu Kai
>>>>Sent: Tuesday, 31 January 2017 7:11 PM
>>>>To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>>TVTM
>>>>few, been at this for three days, things are
>>>>looking good, last problem I encountered was
>>>>that samplitude when I press y to do the ins file thing took jaws away
>>>>there should be an additional step for persons
>>>>doing this alone, telling them to send jaws to
>>>>another soundcard before trying to press y to
>>>>open the ins file diologue. I thought that
>>>>samplitude kept crashing on me, I had already
>>>>typed out half the instructions of what I was
>>>>doing in an email to send here but then I took
>>>>a picture with my phone and sent it to someone
>>>>and they said that everything looked normal,
>>>>and then it hit me and I hooked up another
>>>>sound card to the system and routed jaws to it
>>>>and boom now I have everything up and running, just reinstalling >>>>plugins
now.
>>>>so excited.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>From: <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>Len Viljoen
>>>>Sent: Tuesday, January 31, 2017 2:31 AM
>>>>To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>Subject: [vipaudioaccess] Re: problem with x3 suite
>>>>
>>>>Just checking liu. Did you remember to enter
>>>>your email address also? That could be the reason.
>>>>
>>>>From:
>>>><mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@freeli
sts.org
>>>>[<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>mailto:vipaudioaccess-bounc
e@xxxxxxxxxxxxx]
>>>>On Behalf Of Liu Kai
>>>>Sent: Monday, 30 January 2017 10:04 PM
>>>>To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
>>>>Subject: [vipaudioaccess] problem with x3 suite
>>>>
>>>>TVTM
>>>>Windows 10 64 bit 8 gb ram quad core processor
>>>>240gb ssd for programs 1tb wd black performance drive for samples
>>>>well, I downloaded the trial and I’m putting
>>>>in my serial for offline activation on my studio system.
>>>>however, I’m not sure where I’m going rong, I
>>>>click on activate with serial number.
>>>>and it just takes me back to the serial number field.
>>>>is it that I didn’t put in the numbers
>>>>correctly? this window isn’t moving and it
>>>>keeps going back to the edit field after I’ve typed in the numbers.
>>>>how do I know when I’ve put in the numbers
>>>>correctly, they say not to put in the dashes and I didn’t.
>>>>can anyone verify for me if its supposed to be
>>>>30 digits or what’s going on here?
>>>>thanks.
>>
>
>
>
>----------------------------------------
>"There are two means of refuge from the miseries
>of life: music and cats." - Albert Schweitzer
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at //www.freelists.org/archive/vipaudioaccess
