Well there's always Quick zoom which moves the zoom much quicker than F5
etc. Control plus alt plus shift plus dash for quick zoom in and control
plus alt plus shift plus equals for zoom out. Control plus alt plus shift
plus backspace will tell you the quick zoom status.
_____
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Liu Kai
Sent: 03 February 2017 01:57
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips
oh, aww, really? so I need to have to zoom before I can select something to
quantize it? that seems a bit much? or is it just me.
however james I could assist you with the little I know to bring you up to
at least where I am.
let me tell you from the get go that I don't know of the instrument deff
files because I have no hardware instruments
I'm all software.
so if there's anything along those lines that I could help with I'm more
than happy.
From: Len Viljoen <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>
Sent: Thursday, February 02, 2017 3:34 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips
Hey liu. You definitely need to zoom in with the zoom keys. Those are f5 for
zooming in and f6 for zooming out. You keep zooming in until you can select
the object. Then all should be well.
cheers
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Phil Muir
Sent: Thursday, 02 February 2017 9:20 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips
Well usually in order to do that you would actually have to select
something.
_____
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Liu Kai
Sent: 02 February 2017 18:13
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] a few tips
TVTM
hi guys, so I'm back to wanting to quantize again,
is it only possible to quantise by creating an object?
is it only possible to interact with an object for quantisation by first
pressing f9?
I'm hoping not, because that's how I got quantisation to work last night.
that was so many steps to quantise 8 bars of music.
I remember being able to just press t at the start of the selection, t at
the end. alt left arrow and ctrl q and boom
how come that doesn't work anymore? or am I doing it the rong way?
when I push alt left arrow it says:
no selected object check your timeline zoom ratio with ctrl plus windows +
left arrow or select an object
I'm confuzzled.
please help? and thankies.