[vipaudioaccess] Re: a few tips

  • From: Chris Smart <csmart8@xxxxxxxxx>
  • To: vipaudioaccess@xxxxxxxxxxxxx
  • Date: Fri, 03 Feb 2017 10:55:38 -0500

you zoom to allow you to select in the increments you want, as much or as little as you want.
At 08:56 PM 2/2/2017, you wrote:

oh, aww, really? so I need to have to zoom before I can select something to quantize it? that seems a bit much? or is it just me.
however james I could assist you with the little I know to bring you up to at least where I am.
let me tell you from the get go that I don’t know of the instrument deff files because I have no hardware instruments
I’m all software.
so if there’s anything along those lines that I could help with I’m more than happy.



From: <mailto:len@xxxxxxxxxxxxxxxxxxxxxxxx>Len Viljoen
Sent: Thursday, February 02, 2017 3:34 PM
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips

Hey liu. You definitely need to zoom in with the zoom keys. Those are f5 for zooming in and f6 for zooming out. You keep zooming in until you can select the object. Then all should be well.
cheers

From: vipaudioaccess-bounce@xxxxxxxxxxxxx [mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Phil Muir
Sent: Thursday, 02 February 2017 9:20 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips

Well usually in order to do that you would actually have to select something.


----------
From: <mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>vipaudioaccess-bounce@xxxxxxxxxxxxx [mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Liu Kai
Sent: 02 February 2017 18:13
To: <mailto:vipaudioaccess@xxxxxxxxxxxxx>vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] a few tips

TVTM
hi guys, so I’m back to wanting to quantize again,
is it only possible to quantise by creating an object?
is it only possible to interact with an object for quantisation by first pressing f9?
I’m hoping not, because that’s how I got quantisation to work last night.
that was so many steps to quantise 8 bars of music.
I remember being able to just press t at the start of the selection, t at the end. alt left arrow and ctrl q and boom
how come that doesn’t work anymore? or am I doing it the rong way?
when I push alt left arrow it says:
no selected object check your timeline zoom ratio with ctrl plus windows + left arrow or select an object

I’m confuzzled.

please help? and thankies.





----------------------------------------
"There are two means of refuge from the miseries of life: music and cats." - Albert Schweitzer
--
- To post to the mailing list, simply send email to 
vipaudioaccess@xxxxxxxxxxxxx.

- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.

- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.

- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess

- Online, searchable archives of the list are available at 
//www.freelists.org/archive/vipaudioaccess

Other related posts:

  1. Home
  2. vipaudioaccess
  3. Archive
  4. 02-2017