I will pull out the old book, I think that’s where some of the wierdness lies,
in these new concepts that samplitude has brought to me, in ranges and objects
etc.
From: Steve Spamer
Sent: Friday, February 03, 2017 7:11 AM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips
Yes, an object is data/audio/midi etc...and that data can be anything from 1
beat to 1 hour. You need to be able to zoom so that these pieces of data can
be visible on the screen, in order to work with them.
Remember, this is working the same way a sighted person would work, there’s
very little blind orientated work-arounds. Steve.
From: Len Viljoen
Sent: Friday, February 03, 2017 10:48 AM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips
It depends on where in the project you are. You should definitely make a point
of reading up on zooming. It is very necissary to completely understand how and
why.
cheers
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Liu Kai
Sent: Friday, 03 February 2017 12:39 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips
yes you may add me at xygorth
From: James Malone
Sent: Friday, February 03, 2017 2:47 AM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips
I’ll take you up on that. Any little help is needed.
Do you have Skype?
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Liu Kai
Sent: Thursday, February 2, 2017 5:57 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips
oh, aww, really? so I need to have to zoom before I can select something to
quantize it? that seems a bit much? or is it just me.
however james I could assist you with the little I know to bring you up to at
least where I am.
let me tell you from the get go that I don’t know of the instrument deff files
because I have no hardware instruments
I’m all software.
so if there’s anything along those lines that I could help with I’m more than
happy.
From: Len Viljoen
Sent: Thursday, February 02, 2017 3:34 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips
Hey liu. You definitely need to zoom in with the zoom keys. Those are f5 for
zooming in and f6 for zooming out. You keep zooming in until you can select the
object. Then all should be well.
cheers
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Phil Muir
Sent: Thursday, 02 February 2017 9:20 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: a few tips
Well usually in order to do that you would actually have to select something.
--------------------------------------------------------------------------------
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Liu Kai
Sent: 02 February 2017 18:13
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] a few tips
TVTM
hi guys, so I’m back to wanting to quantize again,
is it only possible to quantise by creating an object?
is it only possible to interact with an object for quantisation by first
pressing f9?
I’m hoping not, because that’s how I got quantisation to work last night.
that was so many steps to quantise 8 bars of music.
I remember being able to just press t at the start of the selection, t at the
end. alt left arrow and ctrl q and boom
how come that doesn’t work anymore? or am I doing it the rong way?
when I push alt left arrow it says:
no selected object check your timeline zoom ratio with ctrl plus windows +
left arrow or select an object
I’m confuzzled.
please help? and thankies.
