Mallesons Stephen Jaques www.mallesons.com Confidential communication there is no prompt but f6 works on NT4 just hit f6 repeatedly when you see blue. John Rowlandson Technical Support Specialist Mallesons Stephen Jaques Sydney T +61 2 9296 3653 F +61 2 9296 3676 john.rowlandson@xxxxxxxxxxxxx -----Original Message----- From: Tom Flanagan [mailto:Tom.flanagan@xxxxxxxxxxxxxxxxxxxx] Sent: Saturday, 15 March 2003 3:55 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: NT4.0 TSE install scsi problems - HELP Urgent- Weekend rebuild jim/ chris There is not an F6 prompt on an nt4.0 install. "S" to specify is the = =3D method here. If I try to proceed without "specifying" a device, the =3D install does not continue. I suppose it's been a while since anyone has = =3D done this NT stuff?? I really think it has some thing to do with the = =3D larger disks. I know NT has boot partition constraints. but I am not = =3D sure about physical disk constraints.??? anybody??? -----Original Message----- From: Chris Lynch [mailto:lynch00@xxxxxxx] Sent: Saturday, 15 March 2003 12:37 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: NT4.0 TSE install scsi problems - HELP Urgent- Weekend rebuild =3D3D20 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 You need to press F6 right when the blue screen appears (right when the = =3D =3D3D CD starts loading). If you have ever installed Windows 2000, you will = =3D =3D3D notice that it states to press F6 to install a mass storage driver =3D3D before the kernel loads. This is the same location you would press F6. Chris - -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On = =3D =3D3D Behalf Of Jim Kenzig http://thethin.net Sent: Friday, March 14, 2003 8:06 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: NT4.0 TSE install scsi problems - HELP Urgent- =3D3D Weekend rebuild Sounds like NT is already detecting the drives and you don't need to add = =3D =3D3D the scsi drivers doesn't it? Did you try going through the install =3D3D without that step? JK - -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of Tom Flanagan Sent: Friday, March 14, 2003 10:51 PM To: 'Thin (E-mail) Subject: [THIN] NT4.0 TSE install scsi problems - HELP Urgent- Weekend = =3D =3D3D rebuild Hi Everyone Got a problem here. I am reinstalling NT 4.0 tse onto newer hard =3D3D drivers. 18GB scsi. (old ones were 9.0GBSCSI). I am using an NT 4.0 TSE = =3D =3D3D sp3 install CD_rom. When I get to the section where it says press S to specify another Mass = =3D =3D3D storage device and put in your manufacturer diskette. I do this. I = =3D3D select the Adaptec ultra 160 Scsi device and proceed. ref: (My ScSi = =3D3D card at boot up says AIC 7899) Next the install tells me it cannot see any hard drives. The hardrive = =3D =3D3D are detected at startup though? Is this because the HDD are too big. Do I need to get hold of a NT4.0 = =3D =3D3D TSE intall disk bundled with a later SPack? HELP? PLEASE Regards Tom Flanagan IT Network Administrator Kailis & France Foods Ph: +61 8 9273 6281 Mob: 0408 927 247 email: tom.flanagan@kailis-france. ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity.=3D3D20 Get 30-40% more users per server to save $$$ and time.=3D3D20 Add users now! - not more servers. If you're using Citrix,=3D3D20 you must learn about TScale! Free 30-day eval: =3D3D http://www.rtosoft.com/Enter.asp?ID=3D3D3D79 ********************************************************** For Archives, to Unsubscribe, Subscribe or=3D3D20 set Digest or Vacation mode use the below link: =3D3D http://thethin.net/citrixlist.cfm -----BEGIN PGP SIGNATURE----- Version: PGP 8.0 Comment: Public PGP key for Chris Lynch iQA/AwUBPnKt+G9fg+xq5T3MEQJqTQCgo7h2VK0qZQTgA6dMRJ8mU5i9/74AnikX vz4HYjrADQgK+1QnHGoTOhFT =3D3D3DiybZ -----END PGP SIGNATURE----- ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity.=3D20 Get 30-40% more users per server to save $$$ and time.=3D20 Add users now! - not more servers. If you're using Citrix,=3D20 you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=3D3D79 ********************************************************** For Archives, to Unsubscribe, Subscribe or=3D20 set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity.=20 Get 30-40% more users per server to save $$$ and time.=20 Add users now! - not more servers. If you're using Citrix,=20 you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=3D79 ********************************************************** For Archives, to Unsubscribe, Subscribe or=20 set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity. Get 30-40% more users per server to save $$$ and time. Add users now! - not more servers. If you're using Citrix, you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=79 ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm