Chris/Jim The rookie has proved he speaks to quickly to doubt the word of the = elite members. When you Press F6 before the blue install screen at the detection stage = the install of mass storage device WORKS. can I still be in the group????? -----Original Message----- From: Chris Lynch [mailto:lynch00@xxxxxxx] Sent: Saturday, 15 March 2003 12:37 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: NT4.0 TSE install scsi problems - HELP Urgent- Weekend rebuild =3D20 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 You need to press F6 right when the blue screen appears (right when the = =3D CD starts loading). If you have ever installed Windows 2000, you will = =3D notice that it states to press F6 to install a mass storage driver =3D before the kernel loads. This is the same location you would press F6. Chris - -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On = =3D Behalf Of Jim Kenzig http://thethin.net Sent: Friday, March 14, 2003 8:06 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: NT4.0 TSE install scsi problems - HELP Urgent- =3D Weekend rebuild Sounds like NT is already detecting the drives and you don't need to add = =3D the scsi drivers doesn't it? Did you try going through the install =3D without that step? JK - -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of Tom Flanagan Sent: Friday, March 14, 2003 10:51 PM To: 'Thin (E-mail) Subject: [THIN] NT4.0 TSE install scsi problems - HELP Urgent- Weekend = =3D rebuild Hi Everyone Got a problem here. I am reinstalling NT 4.0 tse onto newer hard =3D drivers. 18GB scsi. (old ones were 9.0GBSCSI). I am using an NT 4.0 TSE = =3D sp3 install CD_rom. When I get to the section where it says press S to specify another Mass = =3D storage device and put in your manufacturer diskette. I do this. I =3D select the Adaptec ultra 160 Scsi device and proceed. ref: (My ScSi =3D card at boot up says AIC 7899) Next the install tells me it cannot see any hard drives. The hardrive = =3D are detected at startup though? Is this because the HDD are too big. Do I need to get hold of a NT4.0 = =3D TSE intall disk bundled with a later SPack? HELP? PLEASE Regards Tom Flanagan IT Network Administrator Kailis & France Foods Ph: +61 8 9273 6281 Mob: 0408 927 247 email: tom.flanagan@kailis-france. ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity.=3D20 Get 30-40% more users per server to save $$$ and time.=3D20 Add users now! - not more servers. If you're using Citrix,=3D20 you must learn about TScale! Free 30-day eval: =3D http://www.rtosoft.com/Enter.asp?ID=3D3D79 ********************************************************** For Archives, to Unsubscribe, Subscribe or=3D20 set Digest or Vacation mode use the below link: =3D http://thethin.net/citrixlist.cfm -----BEGIN PGP SIGNATURE----- Version: PGP 8.0 Comment: Public PGP key for Chris Lynch iQA/AwUBPnKt+G9fg+xq5T3MEQJqTQCgo7h2VK0qZQTgA6dMRJ8mU5i9/74AnikX vz4HYjrADQgK+1QnHGoTOhFT =3D3DiybZ -----END PGP SIGNATURE----- ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity.=20 Get 30-40% more users per server to save $$$ and time.=20 Add users now! - not more servers. If you're using Citrix,=20 you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=3D79 ********************************************************** For Archives, to Unsubscribe, Subscribe or=20 set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity. Get 30-40% more users per server to save $$$ and time. Add users now! - not more servers. If you're using Citrix, you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=79 ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm